User manual JBL ON STAGE 400ID

[. . . ] Servicing is required when the apparatus has been damaged in any way, such as the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, or the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. To be completely disconnected from the power input, the main plug of the AC/DC adapter shall be disconnected from the main. The main plug of the AC/DC adapter should not be obstructed OR should be easily accessed during intended use. [. . . ] If so, simply reset the product to resume normal operation by following the instruction manual. In case the function could not resume, please use the product in another location. CAUTION riSk of elecTric SHock -- do noT open THE LIGHTNING FLASH AND ARROWHEAD WITHIN THE TRIANGLE IS A WARNING SIGN ALERTING YOU TO DANGEROUS VOLTAGE INSIDE THE PRODUCT. CAUTION: TO REDUCE THE RISK OF SHOCK, DO NOT REMOVE COVER. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THE EXCLAMATION POINT WITHIN THE TRIANGLE IS A WARNING SIGN ALERTING YOU TO IMPORTANT INSTRUCTIONS ACCOMPANYING THE PRODUCT. warning: TO PREVENT FIRE OR ELECTRICAL SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. warning: THE APPARATUS SHOULD NOT BE EXPOSED TO DRIPPING OR SPLASHING AND NO OBJECTS FILLED WITH LIQUID, SUCH AS VASES, SHOULD BE PLACED ON THE APPARATUS. imporTanT: THE APPROPRIATE ADAPTER MUST BE INSTALLED BEFORE INSERTING YOUR iPod INTO THE JBL® PRODUCT. MAKE SURE THAT THE CONNECTOR FOR THE iPod IS PROPERLY ALIGNED WITH THE JBL PRODUCT'S CONNECTOR WHEN INSTALLING YOUR iPod. FAILURE TO DO SO MAY CAUSE PERMANENT DAMAGE TO THE CONNECTOR FOR THE iPod, RENDERING THE iPod INOPERABLE. www. jbl. com 5 English jbl on STageTM* 400id hiGh-PErfOrmANcE SPEAkEr DOck fOr iPod The JBL On StageTM* 400ID high-performance speaker dock is the latest JBL innovation. As a longtime leader in the manufacturing of highend, professional component audio systems, we boast an audio heritage, combined with continual research, that has provided the unique technologies built into the JBL On Stage 400ID system. This complete iPod docking sound system is the new centerpoint of your personal entertainment space. Imagine a combined subwoofer and satellite sound system in one place, with no extra wires running across your table or desk surface. The compact JBL On Stage 400ID high-performance sound center is controllable by remote, up to 15 ft. Connected to your iPod, MP3 player or any other music source with an audio jack, the system produces clean, powerful sound. Take complete control of your music and videos with the JBL On Stage 400ID speaker dock. compaTibiliTy The JBL On Stage 400ID system is compatible with all docking versions of the iPod. A stereo mini jack connection also allows you to enjoy high-quality audio from a variety of other devices, such as iPod shuffle, MP3 and CD players, desktop computers (all platforms), satellite radio and laptops. [. . . ] Make sure the iPod is properly docked or that the auxilary cable is properly connected to an external audio device. Make sure the iPod or Auxiliary Port In cable is seated all the way into the JBL On Stage 400ID unit. Note Is the LED on?If not, power is not getting to your JBL On Stage 400ID system; try the solutions shown. Incorrect source selection Sound comes from one side/channel only iPod or audio cable is not seated properly If you want to use a longer cable, make sure it's a 3. 5mm mini-jack stereo male-to-male cable Distortion (static, crackling or hissing sounds) Too much bass or treble Noise may be caused by interference from a monitor, cell phone or other transmitting device JBL On Stage 400ID is being overdriven by an amplified audio source. Turn monitor off to see whether noise is eliminated. [. . . ]