User manual JBL ON STAGE II

[. . . ] The main plug of AC/DC adaptor should not be obstructed OR should be easily accessed during intended use. Battery shall not be exposed to excessive heat such as sunshine, fire or the like. The apparatus and AC/DC adaptor shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on apparatus and AC/DC adaptor. TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). [. . . ] The speaker system does not contain any user-serviceable parts. Important Note for All Electronic Products: Before inserting or unplugging audio cables from the source device's headphones or line-level output jacks, it is good practice to turn off the device first. This will prolong the life of your unit, help protect your device from static electricity and prevent potential damage. CAUTION: TO REDUCE THE RISK OF SHOCK, DO NOT REMOVE COVER. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: TO PREVENT FIRE OR ELECTRICAL SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING: THE APPARATUS SHOULD NOT BE EXPOSED TO DRIPPING OR SPLASHING AND NO OBJECTS FILLED WITH LIQUID, SUCH AS VASES, SHOULD BE PLACED ON THE APPARATUS. · · · · fcc regulations FCC Declaration of Conformity Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference; and (2) this device must accept any interference received, including interference that may cause undesired operation. · · · · · · Radio and Television Interference This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television reception, which can be determined by turning the equipment off and then on, the user is encouraged to try to correct the interference by one or more of the following measures: · Increase the separation between the equipment and receiver. · Connect the equipment to a different outlet so that the equipment and receiver are on different branch circuits. Press the Select/Enter button. JBL 10-Button Remote Technical Specifications Transmission: Frequency: Operating Range: Battery Type: Dimensions: Width: Height: Depth: Weight (including battery): IR 38kHz 20 feet CR2025 3V 1. 29"(33mm) 3. 38" (86mm) 0. 23" (6mm) 1. 2 oz. Pause a track: Skip to next track: Skip to previous track: Fast-advance track: Fast-reverse track: Increase volume: Decrease volume: Mute: Go to previous menu: Select menu/track/feature: 6 troubleshooting your JBL On Stage IIIP Technical Specifications Frequency Response: 70Hz ­ 20kHz Power Consumption: 20W Maximum Power Input: 12V/1. 5A JBL On Stage IIIP Transducer: (4) 1" Full range per channel Dimensions: Diameter ­ 7 1/2"(190mm) Height ­ 2" (51mm) System Weight: 1. 12 lb (0. 51kg) Battery: Size ­ AA Type ­ Alkaline, NiMh DO NOT MIX BATTERY TYPES. If you have any questions or need further assistance, please visit www. jbl. com. Features, specifications and appearance are subject to change without notice. iPod is paused. Symptom Possible Problem No power to the system. No volume or low volume. Solution Ensure that the power supply is connected to a live power source and properly connected to the JBL On Stage IIIP. Note: When the JBL On Stage IIIP is powered, a green power LED on the JBL On Stage IIIP should light up. Touch the volume "Up" (+) pad on the volume control to unmute and/or increase the system volume level. Note: Touching the volume "Down" (­) pad lowers the system volume. Touching both the (+) and (­) volume control pads at the same time will mute the system. Press the Play button on the iPod or remote control. Sound Quality No sound from the JBL On Stage IIIP speaker system. Symptom No power; green LED is not on. Possible Problem Wall adapter is not plugged into the JBL On Stage IIIP correctly. [. . . ] Wall adapter is not receiving AC power. Solution Check the connection of the wall adapter. Place the wall adapter in a known powered outlet. Undock & re-dock iPhone in unit. Error message: "Device is not iPhone Compatible" is displayed on iPhone after docking on the unit. iPhone has an old firmware version. Charging iPod will not charge. Undock & re-dock iPhone in unit. 8 JBL is a trademark of Harman International Industries, Incorporated, registered in the United States and/or other countries. * JBL On Stage is a trademark of Harman International Industries, Incorporated. [. . . ]