User manual JBL ON TIME 200ID

[. . . ] The main plug of the AC/DC adapter should not be obstructed OR should be easily accessed during intended use. The battery shall not be exposed to excessive heat such as sunshine, fire or the like. The apparatus and AC/DC adapter shall not be exposed to dripping or splashing, and no objects filled with liquids, such as vases, shall be placed on the apparatus and AC/DC adapter. TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). [. . . ] DISPLAY The large, backlit LCD enables easy viewing and menu navigation. Automatic dimming sets the correct brightness level in any room environment. 4 JBL ON TIME 200ID USER GUIDE UNPACKING YOUR JBL ON TIMETM 200ID Carefully unpack your speaker system and identify all its components: IR remote FM antenna JBL On TimeTM 200ID Adapters for iPod Power supply Audio cable AM antenna QUICK SETUP INSTRUCTIONS · · · · · · Choose the appropriate adapter for iPod and place it into the docking station. For backup memory, install three AAA batteries in the battery compartment underneath the unit. Plug the power adapter into the "DC In" jack and then plug the adapter into a wall outlet. If an additional audio source is used, connect the source to the "Aux In" jack. FM ANT AM ANT AUX-IN USB DC 15V AAA AAA Aux In DC In FM ANT AM ANT AUX-IN USB DC 15V WWW. JBL. COM 5 English AAA CONTROLS Setting the Clock 1. Press Menu/Up Level at any screen to display Top Menu (may require repeated presses, depending on which menu state the unit was previously in). The clock is set! Note: During clock-setting, if there is no user input for 2 seconds, display will return to the Now Playing screen. Press any one of the Enter, Up/Down arrows, or Menu/Up Level to return to setting selection. Base Unit Control Power Navigation Select Up Volume Down Volume Up Alarm Source Menu/Up Level Enter Preset Select Down 6 JBL ON TIME 200ID USER GUIDE Playing Music 1. Press "­" button to decrease volume. Languages/Region 1. If AM or FM radio is already selected and playing, use Up/Down arrows to tune frequency; hold either button and release to scan for the next station. Tune to the desired frequency using Up/Down arrows; hold either button and release to scan for the next station. Source Preset Select Up Menu/Up Level Enter Setting Presets 1. Preset is stored! Select Down To Select a Preset for Listening 1. Preset station will begin playing! WWW. JBL. COM 7 English CONTROLS (CONT. ) Alarm Setting 1. Press Menu/Up Level at any screen to display Top Menu (may require repeated presses, depending on which menu state the unit was previously in). Press Enter to confirm; or press Alarm to go directly to the Alarm menu. Use Up/Down arrows to set Day of Week, Weekdays, Weekends, Everyday or One-Time. Alarm is set! Note: During alarm-setting, if there is no user input for 2 seconds, display will return to the Now Playing screen. Press any one of the Enter, Up/Down arrows, or Menu/Up Level to return to setting selection. Use this same procedure to modify a previously set Alarm. Alarm Power Source To Enable/Disable a Set Alarm 1. Press Menu/Up Level at any screen to display the Top Menu (may require repeated presses, depending on which menu state the unit was previously in). Press Enter to confirm; or press Alarm to go directly to the Alarm menu. Press and hold for 2 seconds when listening to the radio and the Now Playing screen is displayed, to store current radio station. [. . . ] JBL On Time is a trademark of Harman International Industries, Incorporated. iPod, Apple and iTunes are trademarks of Apple Inc. , registered in the U. S. "Made for iPod" means that an electronic accessory has been designed to connect specifically to iPod and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. [. . . ]