User manual JBL ON STAGE IV

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual JBL ON STAGE IV. We hope that this JBL ON STAGE IV user guide will be useful to you.


JBL ON STAGE IV : Download the complete user guide (1748 Ko)

Manual abstract: user guide JBL ON STAGE IV

Detailed instructions for use are in the User's Guide.

[. . . ] To completely disconnect this apparatus from the AC mains, disconnect the power supply cord plug from the AC receptacle. The mains plug of the power supply cord shall remain readily operable. Do not expose batteries to excessive heat such as sunshine, fire or the like. [. . . ] · Do not use a combination of rechargeable and conventional batteries. · The Status LED will glow amber when the batteries need to be replaced. Replace the battery door and rotate it to the locked position. * * AC outlet adapter varies by region. MENU 2. Rotate the battery door to the unlocked position and remove it. · Do not mix battery types. Follow the battery polarity that is indicated inside the battery compartment. cAutIoN: Risk of explosion of battery if replaced with incorrect type. Connect a USB Type Mini B cable (not included) to the JBL On Stage IV's USB port and to a USB port on the computer on which your iTunes is located. ImpoRtANt: If you play audio through a docked ipod/iphone and an audio source connected to the Audio In connection at the same time, you will hear both of their outputs mixed through the JBl on stage IV. to hear only one source you will need to manually turn off the source you do not want to hear. Insert the included AC outlet adapter all the way into the power supply (if there is more than one adapter, use the correct one for your region). Then connect the power supply into the JBL On Stage IV's 12V DC In connector and plug it into an AC wall outlet. If you are going to use your JBL On Stage IV with another audio source, plug one end of a 3. 5mm stereo cable (not included) into the JBL On Stage IV's Audio In connector, and plug the other end into the audio source's audio out or headphone out connector. 3. 5mm 4 8. Place the appropriate iPod/iPhone adapter into the JBL On Stage IV's iPod well and place your iPod/iPhone on the docking connector. Make sure the iPod/iPhone is inserted all the way onto the connector. 9. The unit's Status LED will glow white when the system is on. 10. [. . . ] T ·fyou'reusingadockediPod/iPhone, makesurethatitisproperlydockedintheJBL I On Stage IV. ·fyou'reusinganauxiliarysource, makesurethattheaudiocableisproperly I connected to the JBL On Stage IV's Audio In connector and to the source component's audio output. · akesurethattheiPodorothersourcecomponentisnotinthePausemodeand M that its volume control is not turned all the way down. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE JBL ON STAGE IV




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual JBL ON STAGE IV will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.