User manual JBL ON STAGE MICRO II

[. . . ] Do not defeat the safety purpose of the polarized or grounding-type plug. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles and the point where they exit from the apparatus. [. . . ] Contact your local waste management officials for information regarding the environmentally sound collection, recycling and disposal of used batteries. IC Statement and Warning This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. 3 jbl on stage micro II easy setup guide Carefully unpack your speaker system and identify all its components. Move the battery door to the unlocked position to open the battery compartment. Step 3. Connect the power adapter into the jack labeled "6V DC In" on the rear of the JBL On Stage Micro II and plug the power adapter into a wall outlet or power strip. or * Auxilary audio cables not included Step 5. Place your iPhone/iPod on the docking connector or connect a 3. 5mm (1/8") stereo audio cable to the rear of the JBL On Stage Micro II. A green LED will light when the JBL On Stage Micro II system is on. - + Step 7. Press either button to unmute. Syncing and transfering files with your computer Make sure your iPhone/iPod is securely docked into the JBL On Stage Micro II. Connect a USB cable (not included) into the USB jack on the back of the unit, connect other end of the USB cable directly to your computer's USB port. Make sure your iPhone/iPod and iTunes are updated to the latest software version. 4 troubleshooting your jbl on stage micro II Technical Specifications Troubleshooting Symptom Possible Problem No power to the system Power adapter plug is not inserted correctly No volume or low volume Solution Ensure that the power supply is connected to a live power source and properly connected to the JBL On Stage Micro II. Note: When the JBL On Stage Micro II is powered, a green power LED on the JBL On Stage Micro II should light up. Touch the volume "Up" (+) pad on the volume control to unmute and/or increase the system volume level. Note: Touching the volume "Down" (­) pad lowers the system volume. Touching both the (+) and (­) volume control pads at the same time will mute the system. Input source is low Low or drained batteries iPhone/iPod is paused iPhone/iPod is paused (battery-only mode) Increase the volume level on the audio source device. [. . . ] It is recommended that you set the source device EQ to "Flat" or "Off. " Volume level may be too high. Check the volume of the source. EQ setting may be too high. Check the EQ setting on your iPhone/iPod or source device. Turn the JBL On Stage Micro II off and connect it to another wall outlet. A ferrite core can be purchased at your local electronics store. JBL On Stage Micro II emits a loud hum or buzzing noise. Input cable is not plugged in properly. [. . . ]