User manual JBL ON STAGEB

[. . . ] If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched, particularly at the plugs and convenience receptacles, and at the point where they exit from the apparatus. Unplug this apparatus during lightning storms or when unused for long periods of time. Servicing is required when the apparatus has been damaged in any way, such as the power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, or the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. [. . . ] Servicing is required when the apparatus has been damaged in any way, such as the power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, or the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. To be completely disconnected from the power input, the main plug of the AC/DC adapter shall be disconnected from the main. The main plug of the AC/DC adapter should not be obstructed OR should be easily accessed during intended use. The battery shall not be exposed to excessive heat such as sunshine, fire or the like. The apparatus and AC/DC adapter shall not be exposed to dripping or splashing, and no objects filled with liquids, such as vases, shall be placed on the apparatus and AC/DC adapter. TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). PLEASE REFER SERVICING TO QUALIFIED HARMAN CONSUMER GROUP, INC. , SERVICE PERSONNEL. The speaker system does not contain any user-serviceable parts. IMPORTANT NOTE FOR ALL ELECTRONIC PRODUCTS: Before inserting or unplugging audio cables from the source device's headphones or line-level output jacks, it is good practice to turn off the device first. This will prolong the life of your unit, help protect your device from static electricity and prevent potential damage. 2 JBL ON STAGEB USER GUIDE FCC STATEMENT AND WARNING This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. (Note: Touching the volume "Down" [­] pad lowers the system volume; touching both the [+] and [­] volume control pads at the same time will mute the system. ) Increase the volume level on the audio source device. Check the connection of the wall adapter. Frequency Response: 40Hz ­ 20kHz Power Consumption: 20W maximum Power Input: 12V/1. 25A JBL On Stage 200ID Transducer: 1-3/8" (35mm) x 2 (full range per channel) Dimensions: 14-1/8" x 4-5/16" x 2-1/2" (W x D x H) (359mm x 110mm x 64mm) Weight: 1. 5 lb (0. 7kg) No sound from the JBL On Stage 200ID speaker system. Input source is low. Wall adapter is not plugged into the JBL On Stage 200ID system correctly. Wall adapter is not receiving AC power. Place the wall adapter in a known powered outlet; test the outlet with a lamp or other device. Connect the JBL On Stage 200ID system to a known audio source; test the audio source with headphones. Error message: "Device is not iPhone Compatible" is displayed on iPhone after docking on the unit. iPhone has an old firmware version. Upgrade iPhone firmware to latest version. Undock & re-dock iPhone in unit. WWW. JBL. COM 5 English JBL is a trademark of Harman International Industries, Incorporated, registered in the United States and/or other countries. * The trademark On Stage is used with permission of OSA International, Inc. "Made for iPod" means that an electronic accessory has been designed to connect specifically to iPod and has been certified by the developer to meet Apple performance standards. "Works with iPhone" means that an electronic accessory has been designed to connect specifically to iPhone and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. [. . . ] "Made for iPod" means that an electronic accessory has been designed to connect specifically to iPod and has been certified by the developer to meet Apple performance standards. "Works with iPhone" means that an electronic accessory has been designed to connect specifically to iPhone and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. JBL est une marque commerciale de Harman International Industries, Incorporated, déposée aux États-Unis et/ou dans d'autres pays. [. . . ]