User manual JBL ON TOUR XTB

[. . . ] Refer all servicing to the Harman Consumer Group, Inc. , Technical Support Group. fcc/ic statement and WarninG This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause interference. 2) This device must accept interference, including interference that may cause undesired operation of the device. MODIFICATIONS NOT EXPRESSLY APPROVED BY THE MANUFACTURER COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT UNDER FCC RULES. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN THE LIGHTNING FLASH AND ARROWHEAD WITHIN THE TRIANGLE IS A WARNING SIGN ALERTING YOU TO DANGEROUS VOLTAGE INSIDE THE PRODUCT. [. . . ] Plug the adapter into the "12V DC-in" port on the back of the unit and then into a wall outlet. Remove the remote control battery protector before operating the remote control. 1. 2. Power switch volume control (on base unit) Volume increase " " Volume decrease " " Answer/end phone call (MFB) " " 4 jbl on tour Xtb user Guide battery installation 1. Turn the battery compartment cover on the bottom of the JBL On TourTM XTB speaker to the unlocked position; remove the battery compartment cover. Note: System will not use battery power when using AC power. 1. 2. 3. DO NOT MIX BATTERY TYPES. BATTERIES WILL NOT RECHARGE WHILE IN THE UNIT. battery disposal Alkaline batteries are considered nonhazardous and can be disposed of with your regular household trash. Rechargeable batteries (i. e. , nickel cadmium, nickel metal-hydride, lithium and lithium-ion) are considered hazardous household materials and may pose an unnecessary health and safety risk. Unwanted materials should be disposed of in an environmentally sound manner. Contact your local waste management officials for other information regarding the environmentally sound collection, recycling and disposal of used batteries. WWW. jbl. com 5 English Bluetooth pairinG Before you can use your JBL On TourTM XTB system with a Bluetooth-enabled product, you must pair it with that product. The JBL On Tour XTB unit automatically goes into Pairing/Discoverable mode, represented by a constant blue indicator light. Put your Bluetooth-enabled device in Pairing mode so the devices can "see" each other. (Refer to the Bluetooth-enabled device's user's guide for directions and details about putting it into Pairing mode. ) The JBL On Tour XTB unit will be represented as "OnTourXTB" on your Bluetooth-enabled device. The JBL On Tour XTB system is successfully paired and ready to use when the blue indicator light flashes. Note: Bluetooth pairing between two devices does not have to be repeated after a successful initial pairing, unless the JBL On Tour XTB system has been removed from the Bluetooth-enabled device's Bluetooth device list. 1. listeninG to music from a Bluetooth-enabled device 1. Make sure the JBL On Tour XTB system is paired (see Bluetooth Pairing section). Go to the Bluetooth-enabled device's music player and play music. Refer to the Bluetooth-enabled device's user's guide for directions and details about using its music player and transmitting music via Bluetooth technology. Use either the Bluetooth-enabled device or the JBL On Tour XTB remote control to navigate the music player. 6 jbl on tour Xtb user Guide listeninG to a phone call from a Bluetooth-enabled device 1. Make sure the JBL On TourTM XTB speaker is paired (see Bluetooth Pairing section). [. . . ] Other trademarks and trade names are those of their respective owners. Nokia and Nokia XpressMusic are trademarks or registered trademarks of Nokia Corporation. JBL et Odyssey sont des marques commerciales de Harman International Industries, Incorporated, déposées aux États-Unis et/ou dans d'autres pays. JBL On Tour est une marque commerciale de Harman International Industries, Incorporated. [. . . ]