User manual JBL RADIAL

[. . . ] If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. ⷠProtect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles, and at the point where they exit from the apparatus. [. . . ] Connect the standard USB cable to the rear of the JBL Radial and every time you dock your iPod, you will have the connection needed for synchronizing and charging. Evercharge Topology - The JBL Radial provides power to charge your iPod even when not connected to the computer or when the system is off. The clean and compact digital amplification coupled with DSP (digital signal processing) equalization efficiently provides radial transducers with cool-running power. The JBL Radial will provide astonishing bass and clear accurate sound from any direction. Halo acousticsTM - The horizontal acoustic level optimization or Halo acoustics design provides a full, rich sound field from any direction. The dual left and right tweeters and down-firing low transducer provides a 360 degree sound field. HerculesTM and OdysseyTM Transducers ­ The two full range transducers are driven by powerful Neodymium magnets. The Odyssey tweeters provide accurate high frequencies and Hercules provides a ful, rich frequency response from the lowest bass to the highest vocal range. COE (Computer Optimized Equalization) The JBL Radial system equalization is computer optimized to provide a rich, complete sound stage. OCT (Optimized Compression Topology) The JBL Radial utilizes a proprietary compression technology to ensure clean accurate sound at high output levels. Unpacking Carefully unpack your speaker system and identify all components: A) JBL Radial unit B) Power Supply C) Auxiliary audio cable D) USB cable E) Remote General Setup 1) Unpack the JBL Radial and power supply 2) Place your iPod adapter (included with iPod) into docking station 3) Place the iPod into the adaptor 4) Plug power adaptor into jack marked 24Vdc in 5) Plug adaptor into wall outlet 6) If an additional audio source is used, connect source into Aux In 7) If the use of S-Video out to a TV or monitor is desired, connect with S-Video cable 8) Connect the JBL Radial to a computer with the supplied USB cable for sync and charge functions 9) Install supplied coincell batteries into remote Listening to music from an iPod: First locate and place the appropriate corresponding universal iPod adaptor, included with iPod, into JBL Radial iPod docking location, then connect your iPod. C) Select and play music through your iPod controls or send commands to your iPod with the JBL Remote. ( Refer to JBL Remote user's guide for more information on the remote) D) Adjust volume using the "+" and "-" buttons located on the front of JBL Radial. Listening to music from an auxiliary device: The JBL Radial includes a 3. [. . . ] IPod is not recognized by the computer when docked into the JBL Radial or there is an error in data transfer. Third party accessories may be conflicting with the USB or firwire signal. [. . . ]