User manual JBL SFXHCP2

[. . . ] Connect the speakers to the receiver: red (+) on speaker to colored (+) on receiver and black (­) to black (­) (see page 17). Connect the Subwoofer Pre-Out jack to the Line-In jack on your subwoofer. FIGURE 3 ­ HOW TO USE THE BINDING-POST SPEAKER TERMINAL FM Antenna AM Antenna L R CD PLAYER Optical Coax COMP V2 COMP V1 REGION SELECTOR AUDIO RECORDER FIGURE 4 ­ AUDIO CONNECTIONS Dashed lines (­ ­ ­ ­) indicate coax and optical digital audio connections. [. . . ] Choose either type (but not both) for each digital audio source. REC/IN PLAY/OUT Step 4. Connect source components, as shown in Figures 4 and 5, and in the Device Connection Options chart on the back of this guide (see pages 17­18). AUDIO connections: Right channel (red) on source to right (red) on AVR, and left channel (white) on source to left (white) on AVR. DIGITAL AUDIO connections, if available: Choose either coax (orange) to coax (orange) OR optical to optical for each device. Assign the other digital inputs and outputs as appropriate for your equipment (see Step 8). VIDEO connections: Choose component (Y/Pb/Pr ­ green/blue/ red), composite (yellow) or S-Video (4-pin) for each video source. The devices connected to the Component Video 1 and 2 inputs must be used with the DVD and Video 2 sources respectively. Use EzSet to set output levels: Set the Balance to 12 o'clock, and the Volume to ­10dB. Sit in the listening position and hold the remote in front of you at shoulder level, pointing at the AVR580. Press the SPL button for 3 seconds, and release it when the LED flashes amber. Press "5" or "7" to indicate the number of speakers. Hold the remote steady until the process is completed (see pages 27­29). Your system is configured ­ sit back and enjoy! SPEAKER AND AUDIO CONNECTIONS VCR (Video 1) L In/Rec In R Video Video TV or Video Monitor (Video 3) S-Video Component Video Y Pb Pr Y Pb Cable or Sat or HDTV Set-Top Box (Video 2) Component Video Pr L Out R Video S-Video Out L R Optical Coax COMP V2 COMP V1 REGION SELECTOR Component Video L R Video S-Video Y Pb Optical Coax Pr FIGURE 5 ­ VIDEO CONNECTIONS Dashed lines (­ ­ ­ ­) indicate coax and optical digital audio connections. Dotted lines (····) indicate component, composite or S-Video connections. [. . . ] Your system is configured ­ sit back and enjoy! SPEAKER AND AUDIO CONNECTIONS VCR (Video 1) L In/Rec In R Video Video TV or Video Monitor (Video 3) S-Video Component Video Y Pb Pr Y Pb Cable or Sat or HDTV Set-Top Box (Video 2) Component Video Pr L Out R Video S-Video Out L R Optical Coax COMP V2 COMP V1 REGION SELECTOR Component Video L R Video S-Video Y Pb Optical Coax Pr FIGURE 5 ­ VIDEO CONNECTIONS Dashed lines (­ ­ ­ ­) indicate coax and optical digital audio connections. Dotted lines (····) indicate component, composite or S-Video connections. Component video is the preferred connection when available, but you may use any of the three types (but not more than one). [. . . ]