User manual JBL UREI 813C

[. . . ] Although these instructions explain how to install JBL UREI 813C tweeters in a general sense, they do not show the exact installation methods for your particular vehicle. If you feel you do not have the experience, do not attempt the installation yourself ­ instead, ask your authorized JBL car audio dealer about professional installation options. LOUD MUSIC AND HEARING Playing loud music in an automobile can permanently damage your hearing, as well as hinder your ability to hear traffic. [. . . ] The maximum volume levels achievable with JBL speakers, combined with high power amplification, may exceed safe levels for extended listening. JBL accepts no liability for hearing loss, bodily injury or property damage as a result of use or misuse of this product. ABOUT THE FILTER Passive filter design involves precise circuit design and component selection. Moreover, a well-designed filter circuit provides an intended electrical response, when combined with the electrical properties of the speaker, to provide a particular acoustic response. Each enclosed filter has been optimized to provide a flat response when used with a JBL UREI 813C tweeter. Do not use another brand or type of passive crossover, or connect more than one tweeter to a crossover. INSTALLATION TIPS · Always wear protective eyewear when using any tools. · Turn off all audio components and other electrical devices before you start. The StarfishTM tweeter mount is intended to be used when the tweeter will be installed behind a factory grille (e. g. , replacing the factory tweeter behind a door panel). The Starfish will allow you to mount the component tweeter directly to the panel itself or to the area behind the panel. The six mounting tabs can be removed easily to create a number of custom configurations. Aim the tweeter at the listening position by sliding the screw in the groove on the back of the tweeter cup and lock the tweeter in place using the small retaining screw. Rotate the entire assembly in the mounting surface and tighten the large hand nut. 3 ROTATE ENTIRE ASSEMBLY TO AIM ANGLED TWEETER TOWARD LISTENER. Note: Not all possible mounting configurations are shown. In-dash location (may require gluing). 1 SLIDE SCREW UP OR DOWN TO ADJUST TWEETER ANGLE. 2 TIGHTEN SCREW TO LOCK ANGLE SETTINGS. 4 SECURELY TIGHTEN THE LARGE HAND NUT. 3 SPECIFICATIONS UREI 813C 1" Tweeter Power Handling, RMS Power Handling, Peak Sensitivity (2. 83V/1m) Frequency Response Impedance Mounting Depth Cutout Diameter * With enclosed filter GENERAL CARE The loudspeaker grilles may be cleaned with a damp cloth. Do not use any cleaners or solvents on the grilles or the speaker cones. Features, specifications and appearance are subject to change without notice. [. . . ] Do not use any cleaners or solvents on the grilles or the speaker cones. Features, specifications and appearance are subject to change without notice. This product is designed for mobile applications and is not intended for connections to the mains. Declaration of Conformity 50W* 150W* 92dB 2. 5kHz ­ 21kHz 2 Ohms 3/4" (19mm) 1-7/8" (48mm) JBL Consumer Products 250 Crossways Park Drive, Woodbury, NY 11797 USA 516. 255. 4JBL (4525) (USA only) www. jbl. com © 2005 Harman International Industries, Incorporated. [. . . ]