User manual JBL UREI 920-16

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual JBL UREI 920-16. We hope that this JBL UREI 920-16 user guide will be useful to you.


JBL UREI 920-16 : Download the complete user guide (4278 Ko)

Manual abstract: user guide JBL UREI 920-16

Detailed instructions for use are in the User's Guide.

[. . . ] Use extreme caution when cutting or drilling in and around these areas. · Make sure there is sufficient air circulation at the mounting location for the amplifier to cool itself. [. . . ] Specifications · 75W RMS x 2 channels @ 4 ohms and 1% THD + N* · 110W RMS x 2 channels @ 2 ohms and 1% THD + N* · THD + N: 0. 07% (rated power @ 4 ohms) · Signal-to-noise ratio: 90dBA (reference 1W into 4 ohms)* · Signal-to-noise ratio: 108dBA (reference rated power into 4 ohms) · Frequency response: 10Hz ­ 100kHz (­3dB) · Max power: 220 watts * CEA-2006A-compliant 0 Speaker Output Connectors · Connect the speakers to these terminals, observing proper polarity. · Two-channel operation: Connect the left speaker to the L+ and L­ terminals and the right speaker to the R+ and R­ terminals. · One-channel (bridged) operation: Connect the single speaker to the R+ and L­ terminals. Minimum speaker impedance for 1-channel (bridged) operation is 4 ohms. 2 Power Input Connectors · +12V: Connect to the positive terminal of the vehicle's battery. Install an appropriate fuse holder and fuse (30A minimum) within 18 inches of the battery. Install protective grommets when routing wires through the firewall or other sheet metal. 3 Aux Output Connectors (RCA) · Nonfiltered pass-through output. 4 Input Connectors (RCA) · Connect to the RCA outputs from the source unit or signal processor. 5 Input-Level Control · Used to match the input level of the amplifier to the output level of the source unit. 6 Front Crossover-Frequency Control · 12dB/octave crossover, variable from 32Hz to 320Hz. · See C for the adjustment procedure. This product is designed for mobile applications and is not intended for connection to the mains. Features, specifications and appearance are subject to change without notice. Declaration of Conformity Harman Consumer Group, Inc. 250 Crossways Park Drive, Woodbury, NY 11797 www. jbl. com © 2007 Harman International Industries, Incorporated. [. . . ] Features, specifications and appearance are subject to change without notice. Declaration of Conformity Harman Consumer Group, Inc. 250 Crossways Park Drive, Woodbury, NY 11797 www. jbl. com © 2007 Harman International Industries, Incorporated. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE JBL UREI 920-16




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual JBL UREI 920-16 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.