User manual JBSYSTEMS CLC-215B V1.1

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual JBSYSTEMS CLC-215B. We hope that this JBSYSTEMS CLC-215B user guide will be useful to you.


JBSYSTEMS CLC-215B V1.1: Download the complete user guide (1458 Ko)

Manual abstract: user guide JBSYSTEMS CLC-215BV1.1

Detailed instructions for use are in the User's Guide.

[. . . ] Reproduction or publication of the content, even portions, in any manner, without express permission of the publisher, is prohibited. Dispose of the unit and used batteries in an environment friendly manner according to your country regulations. Input connector plate: On the connector plate you will find a switch behind a transparent cap. [. . . ] This means that you can connect the left output of an amplifier to the left input of the subwoofer and the other amplifier output to ® the right Speakon input. (2x 1200Wpeak) B) Woofers in parallel: Used when you have powerful amplifiers that can deliver the high power needed by the subwoofer. Attention: when a second subwoofer is connected, the impedance drops from 4 to 2!Please note that most amplifiers do not support heavy working conditions while under 2 load. moreover the damping factor of your amplifier drops significantly resulting in a weaker bass response. Preferred setup combination: When used with the CLS-8 mid/high cabinets you should try to keep a certain balance with this subwoofer to make a good sounding system. You should use 2 separate amplifiers plus an active crossover or audio processor crossed at +/-130Hz (24dB/oct). Of course you are not limited to this combination, you can experiment with other setups as much as you like! The CLS-215B can easily reproduce sound pressure levels (SPL) sufficient enough to cause severe and permanent hearing damage. Always protect your ears when you are exposed to SPL in excess of 85dB!Be sure that your power amp is turned off before connecting the speakers. Therefore this speaker is intended for indoor use only, use of this product outdoors, in humid conditions, voids all warranties. Speakon® wiring is made as follows: POSITIVE = +1 and +2 NEGATIVE = -1 and -2 Cables to be used: You can use readymade cables but of course you can also assemble the speaker cables yourself. You will also need a pair of Neutrik® Speakon® NL4FC connectors. [. . . ] Every information is subject to change without prior notice You can download the latest version of this user manual on our website: www. Support de connexion d'entrée Sur ce support de connexion se trouve un interrupteur protégé par un couvercle transparent. Zeer stevige multiplex klankkast met: Duurzame krasbestendige verf Metalen handvaten Stalen front grill Aan de achterkant zijn bevestigingspunten voorzien voor wielen (in optie verkrijgbaar) Uitgerust met 2 high power 15" woofers met ALU korf Kan perfect gecombineerd worden met 4x CLS-8 mid/high klankkasten [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE JBSYSTEMS CLC-215B




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual JBSYSTEMS CLC-215B will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.