User manual JENSEN VOYAGER MGH300

[. . . ] 5) You may change tracks or chapters by using the Next or Previous buttons (8). Inputs, press the corresponding button; to return to DVD press the DVD button. 2) Using the Source Selectors (19), choose the button labeled "AUX". 3) If there is an external source (example: CD shuttle or TV audio) connected to the Auxiliary Input Jacks (22) on the rear of the radio, then you can listen to your external source through the system. [. . . ] Note: The T/F also toggles between time and radio frequency on the display. SETTING STATION INTO MEMORY PRESET 1) This unit has the ability to set 18 FM and 12 AM stations into memory. 2) To set the AM or FM stations into memory, first tune to the desired station. 4 3) Then press and hold one of preset buttons (8, 9, 10 or 11) for more than 3 seconds. DVD PLAYBACK OPERATIONS ***Please refer to the remote control figure on page 4. STOP Press this button once when playing, the unit stops and the stop location is memorized. When user presses the PLAY button after that, the unit will resume playback, If user press STOP twice, then disc stops and unit will play the disc from the beginning when the PLAY button is next pressed. If the track number is 10 and over, you should use button 10+ and the other number buttons together to select the track. DIRECTION BUTTON AND ENTER BUTTON Press the DIRECTION button to move the cursor to the selected item, and then press the ENTER button to confirm it. FF/FR Press the button to select fast reverse or forward with different speed. ZOOM Press the button during normal playback to zoom a picture, Press this button repeatedly to change the magnification levels. REPEAT When playing DVD disc, press the button to repeat the title or current chapter. When playing VCD or CD disc, press the button to repeat current track, all tracks and RANDOM play mode. This item contains ; DOLBY ­ Select LPCM and BITSTREAM output and OFF DTS ­ Select LPCM and BITSTREAM OUTPUT and OFF MPEG ­ Select LPCM and BITSTREAM output and OFF PCM ­ Select LPCM 48KHz and LPCM 96KHz output DIGITAL OUTPUT ­ Turn digital output ON and OFF HDCD UPSAMPLE ­ Turn HDCD up sample ON and OFF BACK ­ back to AUDIO SETUP MENU SECURITY SETUP PARENTAL CONTROL The parental control is a rating system such as movie ratings. For example, you could edit out violent scenes that are unsuitable for children Use UP/DOWN arrow buttons to select password item, and enter a personal 4 digital right security code. Use UP/DOWN arrow buttons to select parent control, and use LEFT/RIGHT arrow buttons to select the parental control level. You can not play DVD discs rated higher than level you selected unless you cancel the parental control function. Note ; This feature works with DVD discs that have been assigned a rating. 9 CHANGING PARENTAL CONTROL PASSWORD Use UP/DOWN arrow buttons to select Password item. Enter old 4 ­ digital security code Then enter new 4 digital security code Press UP/DOWN arrow button to exit Note : New 4 ­ digital security code will take effect after closing the Setup menu. NOTE : It is necessary to stop the disc playback if you want to enter the PREFERENCES MENU ITEM. Operating instructions USING THE AUDIO ADJUST BUTTON 1) You can toggle between volume, treble, bass and balance control by pressing the Audio Adjust button (17) 2) Once at the desired function, you can use the volume buttons to adjust. SETTING THE ALARM 1) Hold the Alarm set button (6) 2) Use the H and M buttons (1 and 2) to adjust hours and minutes. AS/PS BUTTON This button is for Auto-Store tuning (AS) and Preset Scan Tuning (PS) (3). 1) Press this button momentarily during radio operation to scan the preset stations in the chosen band's memory. [. . . ] 1) Press this button momentarily during radio operation to scan the preset stations in the chosen band's memory. The unit will stop at each preset station for approximately 5 seconds before continuing on to the next preset station. Press this button momentarily to stop preset scan operation and remain on the current station. 2) A press of this button for longer than 2 seconds will activate the Auto-Store tuning feature which will automatically scan the band and enter up to 6 strong stations into the preset memories. [. . . ]