User manual KENWOOD C-V350

[. . . ] AV CONTROL CENTER C-V351 C-V301 INSTRUCTION MANUAL KENWOOD CORPORATION This manual contains instructions for two models. Model availability and features (functions) may differ depending on country and sales area. B60-4349-00 EN Before applying power 2 Units are designed for operation as follows. Caution : Read this page carefully to ensure safe operation. C-V351/C-V301 (EN) Europe and U. K. AC 230 V only For the United Kingdom Factory fitted moulded mains plug 1. The fuse cover must be refitted when replacing the fuse in the moulded plug. [. . . ] Surround play, its adjustment, STEREO mode play, tone adjustment and Source Direct play are not available. Regarding TAPE 2 (MONITOR) A cassette deck or graphic equalizer can be connected to this unit's TAPE 2 (MONITOR) terminals. If you connect a 3-head cassette deck, you can monitor the source sound, or the sound being recorded, while recording. Pressing the TAPE 2 (MONITOR) key lets you compare the recorded sound and the source sound. Refer to the operating manual for the component you connected for further details. Broadcast reception C-V351/C-V301 (EN) 26 Radio stations can be classified into RDS (Radio Data System) stations and other stations. For listening to RDS stations or storing RDS stations in preset memory, see section entitled "Functions of RDS". ¶ Tuner 100. 00 fm Auto P. Call 01ch MHz Band RDS Main operation menu Memory / 10key Pad Receiving broadcast station 1 Select the TUNER input. RC INPUT RC/Main unit Each press switches the indication. GRC Main Menu ENTER Tuner ENTER 1 VCR 2 AUX 3 TAPE 1 / MD 4 TUNER (frequency display) 5 CD 6 LD / DVD 7 6ch INPUT 2 Select the broadcast band. RC GRC Tuner Each press switches the indication. only) ENTER BAND RDS DISPLAY FM Band ENTER -- 8 9; ) ) MHz "FM", "MW(AM)"or "LW" indicator 3 Select the tuning method. Main unit GRC O AUTO BAN ÷ You can also start the procedure from step 2 by omitting step 1. 1 AUTO lit (auto tuning) 2 AUTO not lit (manual tuning) AUTO Auto ENTER ÷ Usually, set the switch to AUTO (auto tuning). Lights up Select manual tuning when noise interferes due to weak radio wave. (The stereo broadcasting is received in monaural during manual tuning. ) 4 Select a station. Main unit GRC To increase frequency PTY SELECT TUNING Frequency display To increase frequency 8 9; ) ) Auto tuning Manual tuning AUTO MHz TUNED 100. 00 fm MHz "TUNED" lights up when a station is tuned. : The next station found is tuned automatically. : Press repeatedly or hold until a station is tuned. To decrease frequency To decrease frequency ENTER RDS (Radio Data System) C-V351/C-V301 (EN) Functions of RDS RDS is a system which transmits useful information (digital data) for FM broadcasts together with the broadcast signal. Tuners and receivers designed for RDS reception can extract the information from the broadcast signal for use with various functions such as automatic display of the station name. 27 Functions made possible with RDS PTY (Program Type Identification) Search : The tuner automatically searches for a station which is currently broadcasting a specified program type (genre). The RDS indicator lights up when an RDS broadcast (signal) is received. RDS FM EON (Enhanced Other Network) reservation By selecting one of the three kinds of programme previously, the tuner switches automatically to a station broadcasting that kind of program whenever it starts broadcasting. When the broadcasting completes, the tuner returns automatically to the originally-received station. BBC 1 F M * Some functions may not be provided or be given different names depending on countries or areas. PS (Program Service Name) Display : See figure 1 below. When an RDS broadcast is received, the station name is automatically displayed. AUTO MEMORY This function automatically selects the stations providing RDS and FM broadcasting and stores them in the preset memory (up to 40 stations can be preset). Before using a function utilizing the RDS, be sure to perform the AUTO MEMORY operation by referring to the description in "Storing RDS stations automatically in the preset memory". DISPLAY key RC GRC Display mode priority ranking Pressing the RDS DISPLAY key changes the display contents. Tuner ENTER When an FM broadcast is received : 1 PS (Program Service Name) Display 2 Frequency Display 1 A B RDS ENTER 1 PS (Program Service Name) Display : When an RDS broadcast is received, the station name is automatically displayed. If no PS data was sent, "NO PS" is displayed. 2 BAND RDS DISPLAY RDS Display ENTER 2 Frequency Display : The frequency of the current station is displayed. RDS FM BBC 1 F M RDS FM -- 1 ) 2; 5 ) MHz RDS (Radio Data System) C-V351/C-V301 (EN) 28 Use the operating procedure on this page to store RDS stations automatically in preset memory. Up to 40 RDS stations can be preset and received with a simple key operation. This unit is compatible with the RDS so it can use convenient RDS functions including automatic tuning and EON reservation. RDS stations should be stored in the preset memory following the procedure in "Storing RDS stations automatically in preset memory" before listening to RDS stations. AV CONTROL CERTER KC-2 : Keys or controls to be used in this operation Storing RDS stations automatically in preset memory (AUTO MEMORY) The following procedure allows to select stations broadcasting RDS broadcast and store them in the preset memory (up to 40 stations can be preset). 1 Set the INPUT SELECTOR to "TUNER". Main unit INPUT RC/Main unit Each press switches the indication. 1 VCR 2 AUX 3 TAPE 1 / MD 4 TUNER (frequency display) 5 CD 6 LD / DVD 7 6ch INPUT ÷ The previously tuned frequency is displayed. RC INPUT 2 Set the receiving band to "FM". Main unit O BAND RC BAND RDS DISPLAY Each press switches the indication. only) FM -- The "FM" indicator should light. 3 Preset radio stations by AUTO MEMORY. Main unit Press the A. MEMO key. A. MEMO AUTO MEMO AUTO MEMORY RC A B AUTO ME MO Blinks In a few minutes, the stations with which RDS broadcast is received are stored in order beginning from preset channels "01" (up to 40 stations can be preset). When the number of stations providing RDS broadcasting is less than 40, some of other FM stations will be preset in the vacant channels. ÷ If stations have already been stored in preset channels, the same number of these preset channels as the number of stations are cleared and replaced with the data of the newly preset stations. Receiving a preset RDS station RC PTY SEARCH GRC +10 123 456 789 0 +10 1 2 3 4 5 Press numeric keys in the order as described below:. . . 0 ENTER 0 ENTER ) ENTER ÷ If you commit a mistake in entering the digit of 10, press the 0 key several times to return to the original display and re-enter the preset number from the beginning. ÷ Press the RDS DISPLAY key to change the displayed information. 6 7 8 9 0 Enter the preset number (max. 40) of the desired RDS station. RDS (Radio Data System) C-V351/C-V301 (EN) The AUTO MEMORY function gives precedence to RDS stations and assigns them from preset number 1. [. . . ] The voice activation setting is cleared and the activation by nonspecified person is set. ÷ The surround setting is cleared and reset to the initial condition. ÷ The clock and timer setup is cleared and the clock display shows AM 12:00 which is blinking. Specifications Audio section Total harmonic distortion (1 kHz, 1V) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0. 01 % Signal to noise ratio (IHF'66) CD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]