User manual KENWOOD DV-S700

[. . . ] If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or adapter, or consult your dealer. If nonetheless the mains plug is cut off, remove the fuse and dispose of the plug immediately, to avoid a possible shock hazard by inadvertent connection to the mains supply. IMPORTANT : The wires in the mains lead are colouRed in accordance with the following code : Blue : Neutral Brown : Live Do not connect those leads to the earth terminal of a three - pin plug. Operations Other Safety precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Caution : Read this section carefully to ensure safe operation. WARNING : TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE, IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED "DANGEROUS VOLTAGE" WITHIN THE PRODUCT'S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS. [. . . ] Please use the remote control unit provided with this unit. 1 Segment screen Shows the icons which are mainly used to select the controlled components. Scan icon Switches the menu screen contents between skip screen and search screen. (Still) and 5 (up icon) 8 (Pause icon), Moves the cursor upward or lets playback pause temporarily. When a VCD or DVD disc is used, select to freeze the video or advance it frame by frame. F1 to F4 icons Any of these icons switches the screen to one of the menu screens represented by F1 to F4. 3 Icons Icons are displayed according to the controlled component and operation mode. (Lightly press the edge of 5. ) 5 ENTER key Press to set or enter the selected icon (operation mode, etc. ). (ON / STANDBY) key 6 This key turns ON/STANDBY this unit or the equipment connected with the system control cords. Operations Other Hints on Using the GRC All of the procedures for the GRC operations start from the basic operation screen. Although the explanation for going back to this screen is omitted on each page, you can easily go to the basic operation screen if you remember the following procedure. 1 Use the joystick to select the DVD icon. Main Menu Return Confirm CD Tuner TapeA TapeB TV VCR1 VCR2 DVD MD LD Tape1 Cable Sat. Set Up DVD (Scan) 10key Mode Ret. F4 DVD Basic operation screen. Skip F1 F2 F3 2 Press the ENTER key to set the entry. ENTER Graphical remote control unit (GRC unit) DV-S700 (En/E) DVD menu structure Skip menu screen * Select the Skip or Scan icon to display the respective operation menu. DVD (Skip) 10key Mode Ret. For details, read the instructions provided with the played software. Preparations RC GRC TITLE MENU Dogs Lovers Castles Birds \ Selection using cursor (%, fi, @, #) keys (DVD only) F1 ENTER Birds of the world Menu ENTER ENTER ENTER ÷ When the menu has a hierarchical structure, the menu at the lower level appears. ÷ If there are more than one menu (scene) that can be selected, the menus (scenes) can be switched using the ¢ (NEXT) and 4 (PREV. ) keys. 1 When a DVD is played, press the MENU key. Operations 1 4 7 MENU F1 ENTER RC Press numeric keys in the following order. . . To select "5" To select "17" : 5 ENTER : 17 ENTER Menu ENTER 2 Select an item with the numeric keys. 2 3 10key ENTER 5 6 123 456 789 0 ENTER GRC Be sure to press the ENTER key of the joystick every time after selecting a numeric icon. To select "5" To select "17" :5 :1 ENTER 8 9 ENTER 0 7 ENTER 5 Press the ENTER key to start playback. Other RC GRC ENTER Enter ENTER Playback DV-S700 (En/E) Forward search and reverse search (Manual search) Main unit 1 SHUTTLE 27 RC ¡ ¡ : Forward search 1 : Reverse search ¡ 1 GRC ENTER When the 1 or ¡ key is pressed during menu playback of a VCD, the screen may sometimes return to the menu screen. Skipping tracks or chapters Main unit 4 ¢ RC 4 ¢ ¢ : Skip up 4 : Skip down ÷ Tracks are skipped in the direction corresponding to the pressed key, and playback resumes from the beginning of the track (chapter) reached after skipping. ÷ Pressing the 4 key once during playback returns to the beginning of the current track (chapter). GRC Skip ENTER When the 4 or ¢ key is pressed during menu playback of a VCD, the screen may sometimes return to the menu screen. Frame-by-frame playback Software with which this function is available: DVD VCD Press the 8 key during pause. Main unit w / 8 Slow playback Other Software with which this function is available: DVD VCD Slow playback is possible in 5 speed steps. Press the ¡ key or 1 key during pause. RC 8 RC GRC 1 ¡ ENTER GRC ÷ Press the 3 key to resume normal playback. ENTER ÷ Each press advances to the next frame. ÷ Press the 3 key to resume normal playback. Reverse slow playback (1) of a DVD consists of playing frame by frame backward and discontinuously. Reverse slow playback is not available with a VCD. Operations Preparations ÷ With the main unit operation, turning the SHUTTLE control slightly starts fast forward or fast reverse at a relatively low speed; press the play (3) key when the section where you want to play comes. Turning the SHUTTLE control once again increase the speed while the control knob is held; release the control knob when the section where you want to play comes. ÷ Press once to start and continue forward or reverse search at a low speed. (RC, GRC only) ÷ Audio is not output during forward or reverse search. (DVD, VCD) ÷ The video may be disturbed during forward or reverse search. Playback DV-S700 (En/E) 28 Playing tracks in a random order (Random playback) Tracks in a CD or VCD can be played in a random order. [. . . ] ÷ The DVD disc being played does not contain the recording of the selected voice or subtitle language. ÷ The function for displaying message on the TV screen (On-Screen Messages) is set to off. ÷ The surround speakers are set to "Not used" in the speaker mode [8 Speaker Setting]. Remedy ÷ Check the viewing restriction level (RATING) setting. ÷ Reset the initial setup to the factory setup. P ÷ Use a DVD disc containing the recording of the selected voice or subtitle language. [. . . ]