User manual KENWOOD HM-382MD

[. . . ] MICRO HI-FI COMPONENT SYSTEM HM-382MD INSTRUCTION MANUAL KENWOOD CORPORATION COMPACT DIGITAL AUDIO TEXT B60-4719-08 (EN) 2 Before applying power Units are designed for operation as follows. Caution : Read this page carefully to ensure safe operation. Europe and U. K. AC 230 V only Australia . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 110-120 / 220-240 V switchable For the United Kingdom Factory fitted moulded mains plug 1. The fuse cover must be refitted when replacing the fuse in the moulded plug. [. . . ] (Radio Data System) (Except for some areas) 37 3 Start the search. TITLE INPUT PTY When searching for a Rock Music broadcast Display while the tuner is searching. Blinks ÷ No sound is heard while "PTY" is blinking. ÷ If a program of the desired type cannot be found, "NO PROG" is displayed, then after several seconds the display returns to the original display. ÷ If a program of the desired type is found, that program is received and the program type name display changes temporarily to the station name display. Goes off RDS To change to a different program type : Repeat steps 1, 2, 3. FM 108. 00MHz B BC EW Station name display. AUTO TUNED Application section Application section 38 Convenient Rrecording methods Selection of the recording type This unit provides the following recording features in addition to normal recording. Select the appropriate method according to the purpose of recording. 39 Recording a CD onto an MD in short time CD=MD high-speed (2x-speed) dubbing All-track high-speed recording , \ \ \ Records a CD onto an MD in a short period. All tracks in a CD can be recorded onto an MD in half the normal playback period. To record CD with a simplified method One-touch edit recording (CD=MD/ CD=TAPE) All-track recording q Records all tracks in a CD onto either an MD or tape. Single-track recording Records only one CD track being played onto either an MD or tape. (This is convenient for recording of desired tracks from a disc being heard for the first time. ) ÷ One-touch edit recording from an MD to Tape is not available. To record CD simultaneously onto an MD and tape TWIN REC (CD=MD, TAPE) All-track twin recording w \ \ Simultaneous recording of an entire CD onto an MD and tape. Application section single-track twin recording Simultaneous recording of the CD track being played onto an MD and tape. (This is convenient for recording of desired tracks from a disc being heard for the first time. ) To record desired CD or MD tracks by reordering them Program recording (CD=MD/ CD=TAPE/ TWIN REC/ MD= TAPE) er Program recording \ Recording of programmed tracks in the programmed order. (Convenient for recording only the desired CD or MD tracks in the desired order. ) Simultaneous recording of programmed CD tracks onto both MD and Tape is also possible. Note With recording onto tape, the track will be interrupted for the part of the guide tape at the tape reversal, where recording is not possible. Please use single-side recording if this is to be avoided. 40 Convenient Recording Methods All-track high-speed recording (CD =MD) Records a CD onto an MD in a short period. Be sure to put the MD recorder and cassette deck in stop mode. 1 Make the preparations for recording. 1 Select the CD input. 2 Ensure that "PGM", "REPEAT" and "REPEAT ALL" are not lit. 4 Insert disc in the CD player. 2 Start recording. 1 Select "REC MODE ?" then "CD=MD<HIGH> ?". menu volume/ multi control up ÷ If the "PGM" indicator is lit, press the PGM/AUTO/ MONO key to turn it off. ÷ Press the REPEAT key repeatedly until the repeat mode is switched off. Turning the knob switches the function as shown in the character information display. TWIN REC ? down 2 Start recording. set/demo ÷ High-speed recording starts with the first track in the CD and continues until the last track. ÷ During high-speed recording, the CD playback audio is played at a high speed and low volume. ÷ When either high-speed CD playback or MD high-speed recording stops, the other operation also stops. To interrupt a recording STOP Application section 7 (Recording and playback will be stopped. ) ÷ One high-speed recording starts, it is not permitted to record the same disc with high-speed recording for 74 minutes after the start of recording. If you want to record the same disc immediately, use one-touch edit recording (recording at normal speed). q PLEASE WAIT 74min. Time period until high-speed recording of the same disc is permitted Do not turn power off or apply shock or impact while "WRITING" is displayed. If the power cord is unplugged before "WRITING" disappears, the recorded or edited data will be lost. The recorded audio may skip, noise may be recorded on the MD or unnecessary tracks may be created depending on the condition of the CD. In such a case, restart recording at the normal speed. Convenient Recording Methods 41 One-touch edit recording (CD=MD /CD=TAPE) Records all tracks in a CD with a simple operation. (All-track recording) Records a single CD track being played from the beginning. (Single-track recording) Be sure to put the MD recorder and cassette deck in stop mode CD =MD 1 Make the preparations for recording. 1 Insert a disc into the MD recorder. [. . . ] 20 W + 20 W Rated output power during STEREO operation 1 kHz, 0. 7 % T. H. D. , at 6 . . . . . . . . . . . . . . . . . . 15 W + 15 W Caution : Read this page carefully to ensure safe operation. Book shelf type, magnetically shielded Speaker configuration Woofer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 mm, cone type Impedance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]