User manual KENWOOD KDC-C504

[. . . ] In compliance with Federal Regulations, following are reproductions of labels on, or inside the product relating to laser product safety. KENWOOD CORPORATION 2967-3, ISHIKAWA-CHO, HACHIOJI-SHI TOKYO, JAPAN KENWOOD CORP. 10, CHAPTER I, SUBCHAPTER J. NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment may cause harmful interference to radio communications, if it is not installed and used in accordance with the instructions. [. . . ] The methods and precautions to be followed for writing MP3 data are covered in <Notes on playing MP3> (page 6). · It takes time for the unit to check each medium to see if it contains any MP3 file before it starts playing the medium. Press once to fast forward to the next track, twice to fast forward to the track after that, and so forth. Play starts at the beginning of the displayed track number. NOTE You cannot make a forward track search when listening to the last track on a disc. Fast Forwarding and Reversing Fast Forwarding : Hold down on the ¢ button. Release your finger to play the disc at the point. Album Search Selecting the disc you want to hear. Making a Reverse Disc Search : Press the ­ button to display the desired disc number. Each time the button is pressed, the displayed disc number decreases by one. Making a Forward Disc Search : Press the + button to display the desired discnumber. Each time the button is pressed, the displayed disc number increases by one. Play starts at the beginning of the displayed disc. Track Search Selecting the song you want to hear. Press once to search back to the beginning of the current track, twice to search back to the beginning of the previous track, and so forth. Folder No. 1 Press the RDM button to switch the random play function on and off. The RDM indicator lights up when the random play function is turned on. The display of the track number changes continuously as the next track is being selected. When the track has been selected, play starts. NOTE 2 Select the folder Press the + or ­ button. With the ­ button you move to the previous folder, and with the + button to the next folder. The Folder Search mode releases, and the MP3 in the folder being displayed is played. See <Notes on playing MP3> (page 7) for details of the search action in the Folder search mode. 3 When all the tracks on a certain disc have been played using the random play function, the next disc on the changer starts playing (with the random play function still turned on). 2 To change the track being heard, press the ¢ (T. Another track is selected and played. -- 13 -- Operations English Changing the Transmission Frequency 1 To set the frequency change mode Press the REP button for at least three seconds. The FREQ indicator will light up and the currently set frequency will be displayed. FREQ NOTE MHz Some car radios cannot receive a 87. 7 MHz frequency. To cancel : Press the REP button on the display unit for at least three seconds. The FREQ indicator will go off and the frequency change will take effect. The frequency change mode is automatically canceled if you do nothing for 15 seconds. NOTE · The initial value is 88. 3MHz. [. . . ] Cannot play CD-R or CD-RW. 60 Finalization processing is not being conducted for CD-R/CD-RW. Direct Track Search and Direct Album Search can't be done. 66-1 Another function is ON. Track Search can't be done. 66-2 For the albums first or last song. For each album, Track Search can't be done in the backward direction for the first song or in the forward direction for the last song. -- 20 -- Troubleshooting guide MP3 source ? ? Cannot play an MP3. 67 Not conforming to ISO 9660 Level 1/2, Joliet, and Romeo. [. . . ]