User manual KENWOOD SJ346

[. . . ] If you do not need so much cord, shorten it by wrapping any excess cord around the bracket on the underside of the powerbase. Do not use if there is any damage to the kettle, powerbase, cord or plug. This kettle is not intended for use by young children or infirm persons without supervision. [. . . ] Repeat 2 to 3 times. know your Kenwood stainless steel jug kettle spout lid water gauge on/off switch with neon 360° powerbase cord storage scale filter G G G boil-dry protection For safety your kettle is fitted with a re-setable thermal fuse. If you switch on with too little water, your kettle will cut out automatically. When it has cooled down, the switch will reset itself. G G to use your stainless steel jug kettle 1 Fill it though the spout or lid. G Always use the filter and never overfill - boiling water may splash out. To re-boil, wait a few seconds - the on/off switch needs time to reset. G If you experience problems with your kettle switching on and off during use or switching off before boiling, check that the flat element is free from scale - see "descaling". If descaling does not solve the problem contact Kenwood customer care. G Your kettle is fitted with a scale filter to hold back limescale particles. G If you find drops of water under your kettle, don't worry - it is just condensation. care and cleaning Before cleaning, unplug your kettle and let it cool down. G the outside and powerbase Wipe with a damp cloth, then dry. Do not use abrasives - they will scratch the metal and plastic surfaces. Even though your kettle comes with a scale filter, you still need to clean the inside (and the filter) regularly. G G G G G the scale filter 1 Open the lid. 2 Remove the scale filter by holding the tab and then lifting the filter out. 3 either rinse under the tap or use a soft brush or when descaling your kettle, drop the filter in too. Then slide the filter down into the bracket until secure . G G descaling Regular descaling of the flat element will improve the performance of your kettle. If the kettle is not descaled regularly the build up of limescale may result in the following: G problems may be experienced with the kettle switching on and off during use or switching off before boiling. G When limescale starts to build up on the heating element, buy a suitable descaler and descale your kettle. [. . . ] Don't stop to remove clothing. If the cord is damaged it must, for safety reasons, be replaced by KENWOOD or an authorised KENWOOD repairer. UK If you need help with: using your kettle servicing or repairs (in or out of guarantee) call Kenwood customer care on 023 9239 2333. Have your model number ready - it is located on the underside of your kettle. [. . . ]