User manual KLIPSCH AUDIOROCK

[. . . ] This prevents decreased battery performance and service life · The battery (battery or batteries or battery pack) shall not be exposed to excessive heat such as sunshine, fire or the like. CAUTION/MISE EN GARDE Risk of Electric Shock, Do Not Open The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. CAUTION: Risk of Electrical Shock - Do not submerge the product in water CAUTION: To reduce the risk of electric shock, do not remove cover (or back). No user servicable parts ­ refer servicing to qualified service personnel only. [. . . ] It cannot be used or operated without the LightSpeaker transmitter. Remote and transmitter sold separately. 8 AudioRock Manual v2. indd 8 5/31/2010 10:46:21 PM Tech Support: 1-800-KLIPSCH Installation Considerations Remember the outdoor line-of-sight range of the system is up to 125 feet, so as long as the distance from the transmitter to the farthest AudioRock, in any direction, is less than 125 feet, the placement of the transmitter is up to you. Selecting AudioRockTM Locations Your wireless AudioRock can be placed anywhere it is convenient in your outdoor listening areas. You can even space multiple AudioRocks so that no one speaker is further than 35 feet from the other speaker. This will provide for the best and most even coverage for you to enjoy outstanding sound quality. 9 AudioRock Manual v2. indd 9 5/31/2010 10:46:21 PM Tech Support: 1-800-KLIPSCH Setting Up Zones If you have more than one AudioRock and you want to set up separate listening zones in your outdoor area, you have the option of setting up a second zone. An audio zone is any area or group of areas where you want the same audio source playing and want the volume of the speakers to be about the same. If you want an area to have different volume level or play a different set of music then use the two zone option. Please note that there is no right or wrong way to do this, it is simply how you think you want to use your AudioRock system. If you try an option and don't like it, it is easy to change and try another one. NOTE: You have some control over an area being on or off by using the power switch that is on the rear of the AudioRock. Simply turn it off and there will not be any sound in that area. 10 AudioRock Manual v2. indd 10 5/31/2010 10:46:21 PM Tech Support: 1-800-KLIPSCH Preparing AudioRockTM for Installation Please charge your battery for your rock by plugging in the power supply and inserting the battery into the charger. NOTE: Leaving the battery in the charger for periods longer than 24 hours may reduce battery life. When an uncharged battery is placed in the charger the LED on the front of the charger will shine RED; when charging is complete the LED will turn green. Charging the AudioRockTM Battery Step 1: Plug adapter into the charger. Step 2: Plug adapter into AC socket Step 3: Slide battery into the charger making sure that it is inserted correctly and that you do not have to force the battery into the charger. Step 4: When the battery is fully charged the LED on the front of the charger will turn green. Step 5: Remove Battery from charger and place it into the AudioRock. 11 AudioRock Manual v2. indd 11 5/31/2010 10:46:21 PM Tech Support: 1-800-KLIPSCH Installation Instruction Step 1: After the battery has been charged, install it into the battery compartment. Be sure it is pushed all the way in. 1 Zone Volume Pairing 2 Step 2: Be sure the zone switch on the back of your AudioRock is set to zone 1 unless you are setting up a two z one system. If you intend to set up a two zone system be certain the zone switch is set the number corresponding to the zone you intend to place it. 12 AudioRock Manual v2. indd 12 5/31/2010 10:46:21 PM Tech Support: 1-800-KLIPSCH Pairing the AudioRockTM to the Transmitter Before you can begin using and enjoying your new portable wireless AudioRock system it is necessary to "teach" your AudioRock the identity of the transmitter you are using; this teaching is called "pairing" and is very easy to do. Step 1: With the Transmitter power on (LED on front will be lit), find and press the pairing button on the back of the unit. Weatherproof sealing of electronics assures reliability of unit over time when left outdoors. This unit is built to withstand severe weather conditions and the affects of sprinklers and other watering systems. It is, however, not designed to be submerged, or left to sit in open water pools more than 1 inch deep. 15 AudioRock Manual v2. indd 15 5/31/2010 10:46:22 PM Tech Support: 1-800-KLIPSCH AudioRock Specifications: This stereo outdoor wireless rock speaker with 5¼" woofer is optimally tuned for outdoor performance. [. . . ] To obtain any applicable warranty service, please contact the dealer from which you purchased this product, or the distributor that supplied this product. Questions?We're waiting to hear from you! 1-800-KLIPSCH Email us! If you prefer, your questions and comments can be submitted by email, too; you can count on rapid response and clear, concise answers. support@klipsch. com WRITE THE PART NUMBER AND SERIAL NUMBER FROM YOUR PRODUCT BOX HERE AND RETAIN FOR PRODUCT REGISTRATION Part Number:______________________________________________ Serial Number:_____________________________________________ Register your product online at www. klipsch. com/register. 18 AudioRock Manual v2. indd 18 5/31/2010 10:46:22 PM Tech Support: 1-800-KLIPSCH THIS DEVICE COMPLIES WITH FCC RULES PART 15. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) This device must accept any interference received including that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ]