User manual KLIPSCH P-312W

[. . . ] Palladium® P-312W Owner's Manual Important Safety Instructions 1. DO NOT install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. DO NOT defeat the safety purpose of the polarized or grounding type plug. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. [. . . ] Use the Left/ Right touch keys to select from the brightness intensities. From this screen, press the Down or Up touch key to access other control settings. Lowpass Slope This screen is used to adjust how aggressively the subwoofer rejects frequencies above the low pass filter's setting. This screen is not visible if the "Lowpass" filter above is set to "Lowpass Off LFE Mode". There are four settings to choose from: "18, 24, 36 & 48dB/octave". The higher the number, the more the upper frequencies are removed from the subwoofer's output. Start with either the 24 or 36dB/octave setting and adjust from there if required. Adjustment of this parameter can help to optimize the acoustic blend with your main speakers. The proper setting will depend on room acoustics, your main speaker's performance, the placement of the speakers and the subwoofer in the room. From this screen, press the Down or Up touch key to access other control settings. Power This screen is used to select the "Auto On" or the "Always On" power mode for the subwoofer's amplifier. When "Auto On" is selected, the subwoofer will automatically turn on when it senses a signal. It will automatically turn off after 20 minutes if no signal is present and the display screen will show "Standby". In the "Always On" setting, the subwoofer will remain on as long as the main AC power switch on the subwoofer's rear panel is in the "On" position. From this screen, press the Down or Up touch key to access other control settings. Phase This screen is used to adjust the subwoofer's acoustic phase to match that of your main speakers. Use the Left/ Right touch keys to adjust the subwoofer's phase from 0°to 180°. The proper setting of this control is highly dependant on room acoustics and the position of your subwoofer in the room. After setting the volume and lowpass controls, adjust the phase to 0° and listen to a recording with a prominent, repeating bass line in your intended listening position. Repeat this process with the 180° setting and use the setting that yields the greatest amount of bass output. If neither of these settings is better than the other, experiment with intermediate settings. From this screen press the Down or Up touch key to access other control settings. Page 8 Play Demo Use this screen to activate either of two 12-second demonstration programs. Use the Left/Right touch keys to select the desired demo and press the Enter key to start playing the selection. From this screen, press the Down or Up touch key to access other control settings. Page 9 Features and Controls - 4 Back Panel Features Keypad Lock This screen is used to lock the keypad and prevent unintentional changes to your settings by other users. After making all desired adjustments, press the Enter key to lock the keypad. [. . . ] Consult the dealer or an experienced radio/TV technician for help. Warranty The Warranty below is valid only for sales to consumers in the United States and Canada. ("KLIPSCH") warrants this product to be free from defects in materials or workmanship (subject to the terms set forth below) for a period of five (5) years from the date of purchase. During the Warranty period, Klipsch will repair or replace (at KLIPSCH's option) this product or any defective parts (excluding electronics and amplifiers). For products that have electronics or amplifiers, the Warranty period on those parts is for a period of two (2) years from the date of purchase. [. . . ]