User manual KLIPSCH PROMEDIA 2.1 WIRELESS

[. . . ] To completely disconnect this apparatus from the AC Mains, disconnect the power supply cord plug from the AC receptacle. The mains plug of the power supply cord shall remain readily operable. The exclamation point, within an equilateral triangle, is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. The lightning flash with arrowhead symbol within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electrical shock to persons. [. . . ] If you are running a Mac OS, click the Apple icon, select System Preferences, Sound, Output tab, and check to make sure the "Klipsch ProMedia 2. 1 Wireless" is selected as the default output device. NOTE: When removing the USB transmitter the computer should revert back to the computer's built-in sound output device (the laptop's built-in speaker or headphone output, for example). It may be necessary to close and restart the music player software for the change to take effect. Likewise when plugging in the USB transmitter, the Klipsch ProMedia 2. 1 Wireless speakers should become the default output device, but the music player software may need to be restarted. This is not a problem with the Klipsch system; it is a limitation of the computer's software and operating system. If after restarting the music player/DVD player software the music does not play through the ProMedia 2. 1 Wireless system, check to make sure the LED indicators are on but not blinking, and that the operating system, as described above in #4 and #5 has the Klipsch speakers selected as the active audio output device. Also check that the computer's volume control is not muted. may desire to set the volume setting higher on the Control Pod and use the computer's volume control to adjust the sound level. An initial setting of the main volume of 11 to 12 o'clock is recommended. Volume Control Programs Some soundcard and/or PC manufacturers may have software that must be adjusted separately from the Windows volume control. Subwoofer Level For CD or DVD output, the optimum position will be indicated by the mark at 10 o'clock on the sub level control. Optimum sub levels and user preference may vary from source to source. cOntrOL POD featUreS Headphones: The 1/8" stereo headphone output jack, located on the right-hand side of the control pod, turns off the two satellite speakers and the subwoofer output. MP3/Aux: The MP3/Auxiliary input jack is used with portable audio players. The input has a +6dB input sensitivity to help compensate for the lower output voltage of some portable players. If using a computer output on the Aux Input you may need to compensate for the additional gain by lowering the computer's volume level to approximately 50%. To obtain the proper balance with the main signal, the level adjustments in the computer software and in the portable player will need to be adjusted. An example would be listening to an MP3 player while surfing the net and hearing associated sounds from various websites. The mixed sound may not be desirable, and you will ultimately determine how you use this feature. NOTE: During playback of MP3s, overall sound quality may be perceptibly degraded compared to other audio sources such as CD. It is recommended that MP3 files be encoded at a minimum 128 bit rate. SPecIfIcatIOnS (Visit www. klipsch. com for more details) Satellite Impedance: Preamplifier Control Pod: 4 ohms minimum Subwoofer and Main volume level controls LED power indicator MP3/Aux player line input with soundcard mixing function Headphone jack Direct path interface Sealed elliptical two-way enclosure with 25mm polymer tweeter mated to MicroTractrixTM Horn and 3" long-throw mid-bass driver Bass-reflex enclosure with front port and side-firing 6. 5" long-throw driver; sixth-order enclosure design High-efficiency power supply and linear amplifiers designed for uncompressed full power sound Protective limiter function protects the driver and amplifier from extremely high volume playback Satellite: SOftWare anD HarDWare gaIn cOntrOLS Software volume controls in Microsoft Windows 1. Click the Start button on your taskbar, then "All Programs" 2. Windows 95: Choose Multimedia Windows 98/2000/XP/Vista: Choose Entertainment 4. Adjust the Wave Volume Elevator Button to approximately 70% Alternatively, if your computer is not within arms reach of the speakers, you Subwoofer: Amplifier: Subwoofer Limiter: acceSSOrIeS All accessories are available at www. klipsch. com. [. . . ] Approved under the verification provision of FCC Part 15 as a Class B Digital Device. Caution: Changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this device. WIreLeSS tranSMItter cOMPLIance InfOrMatIOn: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. [. . . ]