User manual KLIPSCH SCR-1

[. . . ] The international symbol of an exclamation point inside a triangle is intended to alert you to the presence of important operating, maintenance and servicing information in the manual accompanying the device. To prevent electrical shock, match the wide blade of the plug on the power cord to the wide slot on the power outlet and insert fully. ATTENTION: Pour eviter les chocs electriques, introduire la lame la plus large de la fiche dans la borne correspondante de la prise et pousser jusqu'au fond. To reduce the risk of electrical shock, do not expose this equipment to rain or moisture. [. . . ] Our fourth generation KSW powered subwoofers will add an exciting new dimension to your home entertainment system, providing outstanding bass reproduction of your favorite music and movies. The KSW models provide more powerful amplifiers, all-new driver designs and greater ease of use, making them an incredible value. A Klipsch KSW subwoofer brings that "I'm part of the action" feeling to your home entertainment system in a way few other components can. If this is your first Klipsch purchase, welcome to the fold; if this is an additional Klipsch purchase, we thank you for your loyalty. When it comes to the best in home entertainment, Klipsch is a sound choice. Please take the time to fill out the enclosed questionnaire and warranty registration card or if you prefer, register online at www. klipsch. com. This information helps us serve you better and assists our dealers in meeting your needs as a valued Klipsch customer. Should you have any questions or need more information on Synergy or other Klipsch products, please contact us. Klipsch Chairman & CEO Component Specifications KSW 15 Type: 15" bass reflex, tuned port enclosure Amplifier: Peak output power 800 watts into 16 ohms FTC Rated Power: 265 watts into 16 ohms 22-100Hz @ 1% THD maximum Auto Power On: 2 second ON delay, 15 minute OFF delay Frequency Response: 24-120Hz±3dB Maximum Acoustic Output: 121dB 1/8 space 1 meter Low Pass Crossover: Continuously variable from 40-120Hz, 24dB/octave slope above 120Hz Inputs: 2) Line level RCA phono jacks 1) Line level dedicated LFE channel input (non-filtered) 2) High level speaker terminals Outputs: 2) Line level RCA phono jacks with switchable high pass filter between 50 and 100Hz 2) High level speaker terminals with fixed high pass at 100Hz, 6dB/octave slope Phase: Switchable 0-180 degrees Drive Component: K-1072-K 15" (38. 1cm) driver Net Weight: 45 lbs. (20. 45kg) Height: 19. 5" (49. 53cm) Width: 17. 5" (44. 45cm) Depth: 17. 5" (44. 45cm) Cabinet: Medium density fiber board construction (MDF) Finish: Matte finish black vinyl Voltage: 110/120 VAC 60Hz - Export Version 230 VAC 50/60Hz KSW 10 Type: 10" bass reflex, tuned port enclosure Amplifier: Peak output power 225 watts into 4 ohms FTC Rated Power: 55 watts continuous, 22-125Hz @ 1% THD maximum Auto Power On: 2 second ON delay, 15 minute OFF delay Frequency Response: 29-120Hz±3dB Maximum Acoustic Output: 110dB 1/8 space 1 meter Low Pass Crossover: Continuously variable from 40-120Hz, 24dB/octave slope above 120Hz Inputs: 2) Line level RCA phono jacks 2) High level speaker terminals Phase: Switchable 0-180 degrees Drive Component: K-1070-K 10" (25. 4cm) driver Net Weight: 29 lbs. (13. 18kg) Height: 15. 5" (39. 37cm) Width: 13. 5" (34. 3cm) Depth: 13. 5" (34. 3cm) Cabinet: Medium density fiber board construction (MDF) Finish: Matte finish black vinyl Voltage: 110/120 VAC 60Hz - Export Version 230 VAC 50/60Hz KSW 12 Type: 12" bass reflex, tuned port enclosure Amplifier: Peak output power 441 watts into 4 ohms FTC Rated Power: 105 watts continuous into 4 ohms, 22-100Hz @ 1% THD maximum Auto Power On: 2 second ON delay, 15 minute OFF delay Frequency Response: 26-120Hz±3dB Maximum Acoustic Output: 113dB 1/8 space 1 meter Low Pass Crossover: Continuously variable from 40-120Hz, 24dB/octave slope above 120Hz Inputs: 2) Line level RCA phono jacks, 2) High level speaker terminals Outputs: 2) High level speaker terminals, High pass filtered at 100Hz, 6dB/octave slope Phase: Switchable 0-180 degrees Drive Component: K-1071-K 12" (30. 5cm) driver Net Weight: 35 lbs. The subwoofer should be unplugged from the AC power with the power switch in the OFF position during hookup and installation. To eliminate a tripping hazard, all connections should be unplugged from the back panel of the subwoofer if it is being moved. Avoid extremely long extension cords of small gauge since they may impair the performance of the subwoofer amplifier and present a potential fire hazard. If the subwoofer will not be used for an extended period of time, unplug the power cord from the AC power outlet. Note: 230 volt models are not supplied with an AC power cord, but are equipped with an IEC-type power cord socket. ! CAUTION: SINCE YOUR KLIPSCH SUBWOOFER HAS BUILT-IN ELECTRONICS, DO NOT PLACE IT NEAR SOURCES OF HEAT OR MOISTURE!TAKE CARE TO ROUTE THE POWER CORD SO THAT IT WILL NOT BE CUT, DAMAGED OR PINCHED. Types of Connections Your subwoofer may be installed using either the SPEAKER LEVEL or LINE LEVEL connection, but not both. The LFE connection is an optional line level connection that can be used in conjunction with either type of hookup. Refer to the "LFE IN / BYPASS IN" and "BASS MANAGEMENT" sections for more detail. You can connect the subwoofer so that your main speakers will reproduce a full range signal (all models) or a limited range (bass filtered) signal (KSW 12 and KSW 15 only). Speaker level connections are used when connecting to a receiver or integrated amplifier that lacks line level subwoofer or pre-amp output jacks. Line level connections are often the best choice when connecting the subwoofer to a system comprised of a separate pre-amp/processor and power amplifier. [. . . ] If no signal is sent for a period of 15 minutes, the sub will turn itself off. A red power light indicates a standby mode in which the amplifier will turn on when it senses a signal. Green indicates the subwoofer is on and receiving a signal. "PHASE" / ALL MODELS This switch is used to reverse the polarity (phase) of the subwoofer relative to your main speakers, allowing you to compensate for any acoustic cancellation of bass energy caused by the listening room. Audition a recording with a prominent, repetitive bass line in your listening chair. [. . . ]