User manual KLIPSCH SCR-3

[. . . ] KLIPSCH SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY LAW, THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES WHATSOEVER, INCLUDING BUT NOT LIMITED TO, THE WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PRACTICAL PURPOSE. Some states do not allow the exclusion or limitation of incidental or consequential damages or implied warranties so the above exclusions may not apply to you. This Warranty gives you specific legal rights, and you may have other rights which vary from state to state. Dear Klipsch Legend Series Owner: Congratulations on your purchase of Klipsch Legend Series loudspeakers! [. . . ] While each Klipsch speaker must meet certain specific criteria on its own, it is the careful and deliberate design of the speakers as a system that results in even and all-encompassing sound. Voice, or timbre, matching ensures that the resulting outputs have similar sonic characteristics, meaning as sound moves throughout the listening area from speaker to speaker, it is seamless and enveloping. For a truly complete home theater, you need closely matched components capable of accurately reproducing all of the detail and dynamic range of the source material. Klipsch recommends the following grouping of components to complete your Klipsch Legend Home Theater: 2­SCR-3 10 Towers 1­SCR-3-C7 Center Channel 2­KSF-S5 Rear Surrounds 1­KSW 200 Powered Subwoofer 2­SCR-3 20 Towers 1­SCR-3-C7 Center Channel 2­KSP-S6 Rear Surrounds 1­KSW 200 Powered Subwoofer 2­SCR-3 30 Towers 1­SCR-3-C7 Center Channel 2­KSP-S6 Rear Surrounds 1­KSW 300 Powered Subwoofer Component Specifications LEGEND SCR-3 10 TOWER Sensitivity: 98 dB @ 1 watt/1 meter Frequency Response: 32 Hz-20 kHz±3 dB Nominal Impedance: 8 ohms Crossover Frequency: 2300 Hz Power Handling: 150 watts maximum continuous (600 watts peak) Enclosure Type: Bass reflex via a single, wide-flare, rear firing port Drive Components: Two-way system using one 1" (2. 54 cm) K-100-K tweeter/midrange compression driver with a 90ºx 60º Tractrix Horn and two 10" (25. 4 cm) K-1056-K woofers Weight: 65 lbs. (29. 5 kg) Height: 38. 75" (98. 43 cm) Width: 12" (30. 5 cm) Depth: 16" (41 cm) Finish: Light Oak, Medium Oak, Black Satin, Mahogany. LEGEND SCR-3 20 TOWER Sensitivity: 100 dB @ 1 watt/1 meter Frequency Response: 34 Hz-20 kHz±3 dB Nominal Impedance: 8 ohms Crossover Frequency: 750 Hz and 7 kHz Power Handling: 200 watts maximum continuous (800 watts peak) Enclosure Type: Bass reflex via dual, wide-flare, rear firing ports Drive Components: Three-way system using one 1" (2. 54 cm) K-79 tweeter compression driver with a 90º x 40º exponential horn; one 1. 5" (3. 81 cm) K-52 midrange compression driver with a 90º x 60º Tractrix Horn and two 10" (25. 4 cm) K-1036 woofers Weight: 86. 5 lbs. (39. 27 kg) Height: 40. 75" (103. 51 cm) Width: 12" (30. 5 cm) Depth: 16" (41 cm) Finish: Light Oak, Medium Oak, Black Satin, Mahogany. LEGEND SCR-3 30 TOWER Sensitivity: 102 dB @ 1 watt/1 meter Frequency Response: 36 Hz-20 kHz±3 dB Nominal Impedance: 8 ohms Crossover Frequency: 825 Hz and 7 kHz Power Handling: 200 watts maximum continuous (800 watts peak) Enclosure Type: Bass reflex via dual, wide-flare, rear firing ports Drive Components: Three-way system using one 1" (2. 54 cm) K-79 tweeter compression driver with a 90º x 40º exponential horn; one 1. 5" (3. 81 cm) K-52 midrange compression driver with a 90º x 60º Tractrix Horn and two 12" (30. 48 cm) K-31 woofers Weight: 102 lbs. (46. 3 kg) Height: 45. 25" (115 cm) Width: 14" (35. 56 cm) Depth: 16" (41 cm) Finish: Light Oak, Medium Oak, Black Satin, Mahogany. LEGEND SCR-3-C7 CENTER CHANNEL Sensitivity: 99 dB @ 1 watt/1 meter Frequency Response: 70 Hz-20 kHz±3 dB Nominal Impedance: 8 ohms Crossover Frequency: 2 kHz Power Handling: 150 watts maximum continuous (600 watts peak) Enclosure Type: Sealed Cabinet Drive Components: Two-way system using one 1"(2. 54 cm) K-90-KV video-shielded compression driver with a 90º x 60º Tractrix Horn and two 8" (20. 32 cm) K-1062-V magnetically shielded woofers Weight: 38 lbs. (17. 25 kg) Height: 11" (28 cm) Width: 27. 2" (69 cm) Depth: 9. 12" (23. 18 cm) Finish: Light Oak, Medium Oak, Black Satin, Mahogany. The Spike Kit Contains: 4­Threaded Spikes (one end pointed, the other blunt) 4­Jam Nuts 4­Spike Covers To Install the Feet: 1. Slide the blunt end of the threaded spike through the bottom (narrow end) of the spike cover and seat the jamb nut into the hexagonal well in the foot. Thread the foot assembly into the insert in the bottom of the speaker cabinet. Refer to Figure 1. Spike Cover SCR-3 20/30 Cabinet Threaded Cabinet Insert Vinyl Cap Jamb Nut Well Jamb Nut Threaded Spike Figure 1 The feet can be adjusted to compensate for an uneven floor. This technology utilizes two horn tweeters aligned at 90° to one another to create an optimal 180° soundfield. The resulting wide and evenly dispersed soundfield delivers both the direct, localized sounds and the ambient effects that make it perfectly suited for rear channel surround applications. This unique Klipsch approach is ideal for the latest multi-channel 5. 1 (Dolby Digital® and DTS ®) soundtracks on DVD and laser disc formats, making Klipsch truly "Digital Ready. " PLACEMENT OF THE KLIPSCH SURROUND SPEAKERS One of the principal advantages of Klipsch's unique Wide-Dispersion Surround Technology is greater placement flexibility. Due to the full 180° coverage pattern, you can place these speakers on the rear wall, side walls or even on the ceiling. The most common placement is on the side walls, adjacent to the listening/viewing area, or on the rear wall facing the front of the room. A height of approximately five to seven feet from the floor to the base of the cabinet is recommended. An alternative placement would be on the ceiling either directly above or several feet behind the listening area. In a ceiling installation, the speaker can be oriented with drivers facing either the front and rear of the room or the side walls to compensate for room shape and layout. Optimal surround speaker placement is highly dependent upon individual room layout and the resulting acoustics. Experiment with speaker placement until you achieve a desirable balance of envelopment and directional cues. Consult your Klipsch dealer for more specific guidance on placement to suit your particular home theater room. About Speaker Wire Connections When making any type of speaker wire connection, be sure to observe the proper polarity. [. . . ] In a home theater system, some correlation between the size of the video image and the sonic image may dictate final placement of the speakers. For a higher quality stereo image, angle, or toe in, the speakers toward the listener. Some additional bass will result if you place the speakers in a corner or near a wall: This provides greater bass coupling due to the additional reflected energy from the walls and floor. Room acoustics vary, so experiment with specific placement within the room. Installation of SCR-3 20 and SCR-3 30 Spike Feet The larger SCR-3 models have four threaded inserts, covered with a soft vinyl cap, on the bottom of the cabinet. [. . . ]