User manual KLIPSCH SCW-3

[. . . ] For more information on the controls mentioned in this manual and on bass management, see your dealer or visit www. Frequencies above the set level are filtered out, allowing you to blend the subwoofer's output into your main speakers. "LEVEL" ­ The "Level" control serves as an overall volume control for the subwoofer. It is used to match the output level of the sub to your main speakers. [. . . ] You want to select one of the two positions, either 0 or 180, in which your sub has more output at your listening position. "POWER OFF/AUTO/ON" ­ Selecting "Auto" allows the sub to turn on automatically when it senses an input signal. Klipsch powered subwoofers have LED's on the bottom of the front panel that indicates power status of the built-in amplifier. The LED will light RED when the amplifier is in standby mode, and GREEN when the amplifier is on and receiving a signal. The only thing you should ever need to do to your speakers is dust them occasionally. Never apply any abrasive or solventbased cleaner or any harsh detergent. You can clean the grilles with the brush attachment of a vacuum cleaner. UNPLUG this apparatus during lightning storms or when unused for long periods of time. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit. For optimum performance, place your subwoofer in a corner of the room on the same wall as your front channel speakers. Please note that room placement can have a dramatic effect upon the performance of your powered subwoofer. Corner placement, as suggested above, will increase the amount of bass output, while placing the subwoofer along the middle of a wall, or out in the room will decrease the amount of bass output. Experiment with a number of different placement options and control settings to find the one that best suits your particular room and taste. When choosing your subwoofer's location, keep in mind that you will need to connect the subwoofer's built-in amplifier to an AC power outlet. Conventional Speaker Wire Connection -- Using 16-gauge or larger speaker wire, connect the RED "positive" (+) terminal of your amplifier's LEFT channel to the RED "positive" (+) terminal of your subwoofer's LEFT channel input ("Speaker In"). Connect the BLACK "negative" (­) terminal of your amplifier's LEFT channel to the BLACK "negative" (­) terminal of your subwoofer's LEFT channel input ("Speaker In"). Repeat this procedure for connecting your amplifier's RIGHT channel to your subwoofer's RIGHT channel input. Take care to make sure that no bare wires from any of the connections touch any other terminals as this could cause a short and damage your equipment. The warranty on this product if it is sold to a consumer outside of the United States or Canada shall comply with applicable law and shall be the sole responsibility of the distributor that supplied this product. [. . . ] The warranty on this product if it is sold to a consumer outside of the United States or Canada shall comply with applicable law and shall be the sole responsibility of the distributor that supplied this product. To obtain any applicable warranty service, please contact the dealer from which you purchased this product, or the distributor that supplied this product. Name: Street Address: City/State/Zip: Home Phone: Work Phone: E-mail Address: Would you like to receive the latest product updates and news via e-mail?Product Purchase Model and serial number must be included to honor your warranty card. [. . . ]