User manual KUSSMAUL 091-9-086

[. . . ] 3, 2005 INSTRUCTION MANUAL AUTO DRAIN AN AUTOMATIC MOISTURE DRAIN FOR THE 091-9 AIR COMPRESSOR MODEL #091-9-086 INPUT :12Volt, Solenoid 1 YEAR WARRANTY KUSSMAUL ELECTRONICS CO. , INC. 170 CHERRY AVE. , WEST SAYVILLE, N. Y. [. . . ] Install pressure switch on Auto Drain before installing Auto Drain on pump. It may be necessary to slightly rotate solenoid valve to clear pressure switch when installing. AUTO DRAIN WIRING INSTALLATION 1. Connect the AUTO DRAIN solenoid wires to output terminals of pressure switch. These are the same terminals that supply power to the AUTO PUMP motor 3. Test by bleeding system pressure to start AUTO PUMP and note that when pump shuts down, air and moisture will bleed out of drain tube. Position drain tube to direct moisture to exterior of vehicle. AUTO DRAIN SOLENOID CAUTION: Observe Correct Polarity INSTALLATION RECORD & WARRANTY Date Installed Installed By Vehicle Identification Vehicle Owner All Auto Pumps of Kussmaul Electronics Company Inc. [. . . ] The purchaser, by the acceptance of the equipment, assumes all liability for any damages which may result from its installation, use or misuse, by the purchaser, his or its employees or others. [. . . ]