User manual KUSSMAUL 091-9-089

[. . . ] 3, 2005 INSTRUCTION MANUAL AUTO DRAIN AC AN AUTOMATIC MOISTURE DRAIN FOR THE 091-9B-1 AIR COMPRESSOR MODEL #091-9-089 INPUT :120 Volt, AC Solenoid 1 YEAR WARRANTY KUSSMAUL ELECTRONICS CO. , INC. 170 CHERRY AVE. , WEST SAYVILLE, N. Y. [. . . ] normally open Filter with metal bowl Nipple, 1/8 NPT Nipple, 1/4 NPT Close Plug, 1/8 NPT Plug, 1/4 NPT Elbow, 1/8 NPT, male - 1/4 tube Street Elbow, 1/4 NPT Check Valve, 1/4 NPT male -1/4 NPT male Tee, Brass, 1/4 NPT 1/4 Tubing, 24 inches Sleeving, 1/4" PVC, 11 inches 091-9-089 AUTO DRAIN INSTALLED ON 091-9B-1 AUTO PUMP AUTO DRAIN WIRING INSTALLATION 1. Connect the AUTO DRAIN solenoid wires to output terminals of pressure switch. These are the same terminals that supply power to the AUTO PUMP motor 3. Test by bleeding system pressure to start AUTO PUMP and note that when pump shuts down, air and moisture will bleed out of drain tube. Position drain tube to direct moisture to exterior of vehicle. POWER CORD TO MOTOR PRESSURE SWITCH AUTO DRAIN SOLENOID INSTALLATION WIRING DIAGRAM INSTALLATION RECORD & WARRANTY Date Installed Installed By Vehicle Identification Vehicle Owner All Auto Pumps of Kussmaul Electronics Company Inc. Liability is limited to repairing or replacing at our factory, without charge, any material or defects which become apparent in normal use within 1 year from the date the equipment was shipped. [. . . ] The purchaser, by the acceptance of the equipment, assumes all liability for any damages which may result from its installation, use or misuse, by the purchaser, his or its employees or others. [. . . ]