User manual KUSSMAUL 091-96

[. . . ] BOOK# 091-96, 3-3-98 INSTRUCTION MANUAL LOAD MANAGER 1H UNDER-VOLTAGE DETECTOR RELAY WITH HYSTERESIS MODEL #091-96-XX A BATTERY VOLTAGE MONITOR WHICH DETECTS AN UNDER-VOLTAGE CONDITION. 3 YEAR WARRANTY KUSSMAUL ELECTRONICS CO. , INC. 170 CHERRY AVE. , WEST SAYVILLE, N. Y. [. . . ] The 091-98-xx Load Manager 1H contains an adjustable high hysteresis feature. With the normal trip point set to 12. 0 volts (24. 00 volts), the hysteresis circuit maintains the relay energized until the voltage increases above 13. 45 volts. This assures that the loads being controlled are not energized until the sensed voltage reaches 13. 45 volts. Turning R15 CCW will decrease the hysteresis while turning CW will increase. Unless absolutely necessary it is recommended that the hysteresis remain at the factory setting. SPECIFICATIONS: Model Input voltage Input amps, relay off Input amps, relay on Relay contacts, amps Case Weight 091-96-12 10 to 15 volts D. C. 0. 02 Amps 0. 1 Amps 30 Amps non-weatherproof 4 ounces 091-96-24 20 to 30 volts D. C. 0. 015 Amps 0. 05 Amps 30 Amps non-weatherproof 4 ounces 5. 10 3/16" DIA. 2. 95 4, 50 1. 55 OUTLINE DRAWING To Load will be energized when voltage sensed goes below set-point. N. C. N. O. C Input Fu se To Voltage Sense Point Figure 1, Load Manager 1 Installation Voltage Trimmer 11. 8 volts Hysteresis Adjustment Figure 2, Voltage Adjustment INSTALLATION RECORD & WARRANTY Date Installed Installed By Vehicle Identification Vehicle Owner WARRANTY All products of Kussmaul Electronics Company Inc. [. . . ] The purchaser, by the acceptance of the equipment, assumes all liability for any damages which may result from its installation, use or misuse, by the purchaser, his or its employees or others. [. . . ]