User manual LA SOMMELIERE CTV240.2Z

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual LA SOMMELIERE CTV240.2Z. We hope that this LA SOMMELIERE CTV240.2Z user guide will be useful to you.


LA SOMMELIERE CTV240.2Z : Download the complete user guide (11091 Ko)

Manual abstract: user guide LA SOMMELIERE CTV240.2Z

Detailed instructions for use are in the User's Guide.

[. . . ] Leaving a space of at least 8cm between the wall and the back of your wine cabinet. Please keep your wine cabinet away from other domestic appliances like fridge, electric welding machine to avoid interference. Gently incline the wine cabinet backwards in order to adjust the front feet (screw adjustment) so that your wine cabinet stands at perfect level. 2 Installing the drip tray Install the drip tray on the compressor support at the back of the cabinet, locating it under the small pipe protruding from the housing, the lower part of the tank being placed under this pipe. [. . . ] There are front and back shelf bracings, the longer one is back shelf bracing, should be fixed with the hook on the back inside the case; another type is front shelf bracing, should be fixed with the hook on the front inside the case. The two shelf bracings should be at the same level to keep the shelf stay at a perfect position. Two dumpy wires in front of the shelf should lock the shelf on the shelf bracing 19 3. 3 Installing the wooden shelf See diagram below to install your wooden shelf. 7 The installation of door base support When replacing the reversible door, should change the installation direction of the base support; rotating pull up at the same time the base support can be removed; spin down at the same time the base support can be fixed. 8 The installation of the wall separate screws When the back side of wine cellar placed against the wall, should need to install the wall separate screws. As shown, the wall separate screws were installed in the flange on both sides of compressors pallet. 2 Temperature settings (1) Upon temperature zone on the display broad with the symbol " on the display broad with the symbol " (2) Press " indicates. Press or to adjust " indicates, under temperature zone , the display start to flash, then press again that the display (flashing) display other zone set temperature, then press temperature of another zone. 8 seconds if no operation, display board will display real-time temperature. Press and hold down for 5 seconds to display the life of carbon filter (unit: day). Otherwise the display automatically returns to the temperature display after 15 seconds. Note: Don’t press (4)The button when displaying the life of carbon filter, or the number of life will be disordered. Press and hold down for 5 seconds to display the ” ②When door opens, displaying symbol when confirm. otherwise the display two LED mode: ①Stay on mode , displaying symbol “ ”. Press to choose LED mode, then press “ automatically returns to the temperature display after 15 seconds. ϼ5)Press and hold for 5 seconds, all output will be cut off including the display and LED. ϼ6) press and together at sametime, humidity values will be displayed on the display panel, after 5 seconds, the display should be returned to the original layout automatically. 3 Alarm explanation “Door open” alarm: will flash when door is open for more then 15 minutes and your will hear the buzzer ring three times every 30 seconds. Will flash and the buzzer will for 5 seconds, then the life of new carbon filter will display 4. [. . . ] They could damage the wine cabinet and cause themselves serious injury. (21) Take care to keep keys out of reach of children in order to avoid them locking themselves in the cabinet. Simple problem analyses Problem Compressor not working Problem analyses Power not connected Power lead or wire damaged Fuse broken Internal circuit fault Power supply off In heating process Resolve method Check the power Contact distributor or service agent Change fuse Contact distributor or service agent Check if power cut Common phenomena. When the temperature inside cabinet is lower than that you set, the cabinet will be heated automatically Switch off the power, restart 3 minutes later Adjust front feet until perfect level Check temperature, reset it Only open when necessary Contact your distributor or service agent Contact your distributor or service agent Contact your distributor or service agent Adjust front feet until perfect level See Alternative hanging of door and install it correctly Put the shelf back to right position Compressor noisy or frequently on or off Not cold enough Power supply not stable Cabinet not on flat floor Temperature set too high Door open too long or too often Door seal damaged LED do not light Can not close door properly Electric circuit problem LED damaged Cabinet not on level Door installation incorrect after change hanging side Shelf extend out of the case 25 Désignation Marque / Trade mark LA SOMMELIERE Référence du modèle / Model reference Catégorie du modèle d’appareil de réfrigération / Category of CTV240, 2Z/MC240. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE LA SOMMELIERE CTV240.2Z




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual LA SOMMELIERE CTV240.2Z will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.