User manual LAVA SSERIAL-PCI

[. . . ] MOKO L74. 1 PN MOKO S-1 MADE IN JAPAN 0255351 MADE IN CANADA LAVA COMPUTERS Rev. [. . . ] To view this configuration in Windows 95/98/Me, click Start | Settings | Control Panel | System | Device Manager | Ports. To view this configuration in Windows 2000/XP, click Start | Settings | Control Panel | System, then choose the Hardware tab and click on Device Manager. Note: Installation instructions for Windows NT 4. 0 are located in the NT 4. 0 directory on the Installation Diskette. Modifying I/O Address and IRQ Resources in Device Manager is NOT recommended. Changing the Com numbering of your SSerialPCI port (Windows 95/98/Me only) Unless you already have more than 4 Com Ports installed in your PC, Windows will by default configure the SSerial-PCI as Com 5. reassign Com 5 to be Com 3), please use the Lava Com Port Redirect Utility included in the "Utils\Redirect" subdirectory of your Installation Diskette. Such a reassignment may be necessary because some communications applications programs do not recognize port designations beyond Com 4. The Com Port Redirect utility will allow you to change the Com numbering of your ports without changing I/O address resources. [. . . ] Operation is subject to the following conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. [. . . ]