User manual LAVA SSERIAL-PCI-LP

[. . . ] Lava SSerial-PCI/LP Installation Manual SSERIAL PCI/LP MADE IN P. N. [. . . ] During this process, a Lava SSerial-PCI entry will be created in Device Manager. To view this configuration in Windows 95/98/Me, click Start | Settings | Control Panel | System | Device Manager | Ports. To view this configuration in Windows 2000/XP, click Start | Settings | Control Panel | System, then choose the Hardware tab and click on Device Manager. Note: Installation instructions for Windows NT 4. 0 are located in the NT 4. 0 directory on the Installation Diskette. Modifying I/O Address and IRQ Resources in Device Manager is NOT recommended. Changing the Com numbering of your SSerialPCI/LP port (Windows 95/98/Me only) Unless you already have more than 4 Com Ports installed in your PC, Windows will by default configure the SSerial-PCI/LP as Com 5. reassign Com 5 to be Com 3), please use the Lava Com Port Redirect Utility included in the "Utils\Redirect" subdirectory of your Installation Diskette. [. . . ] Operation is subject to the following conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. [. . . ]