User manual LG DVC8700

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual LG DVC8700. We hope that this LG DVC8700 user guide will be useful to you.


LG DVC8700 : Download the complete user guide (7957 Ko)

Manual abstract: user guide LG DVC8700

Detailed instructions for use are in the User's Guide.

[. . . ] Detailed instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide. Model E1942S E2042T E2042S E2242T DVC8700 E2342T E2442T ENGLISH ENG VESA (A x B) 75 x 75 Standard M4 screw Number of 4 screws 100 x 100 10 cm 10 cm 10 cm 10 cm CAUTION y Disconnect the power cord first, and then move or install the Monitor set. y If you install the Monitor set on a ceiling or slanted wall, it may fall and result in severe injury. y Use only an authorized LG wall mount and contact the local dealer or qualified personnel. y Do not over tighten the screws as this may cause damage to the Monitor set and void your warranty. [. . . ] Use a screensaver if possible. Self Image Setting Function Press the power button on the bottom panel to turn the power on. When monitor power is turned on, the "Self Image Setting" Function is executed automatically. (Only supported in Analog Mode) NOTE y When you want to use two PC in our Monitor, please connect the signal cable(D-SUB/ DVI-D) respectively in Monitor set. y If you turn the Monitor set on while it is cold, the screen may flicker. This function provides the user with optimal display settings. When the user connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals. (Only supported in Analog Mode) y `AUTO' Function. When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted screen while using the device or after changing screen resolution, press the AUTO function button to improve resolution. (Only supported in Analog Mode) CUSTOMIZING SETTINGS 11 CUSTOMIZING SETTINGS ENG ENGLISH 1 Press the desired button on the bottom of the Monitor set. 2 Change the value of the menu item by pressing the buttons on the bottom of the Monitor set. To return to the upper menu or set other menu items, use the up arrow ( ) button. 3 Select EXIT to leave the OSD menu. Monitor set Buttons Button Accesses the main menus. (See p. 12) OSD LOCKED/ UNLOCKED Description This function allows you to lock the current control settings, so that they cannot be inadvertently changed. You can unlock the OSD controls at any time by pushing the MENU button for several seconds. The message "OSD UNLOCKED" should appear. Use this button to enter SUPER ENERGY SAVING menu. For more information. (See p. 17) (SUPER ENERGY SAVING) Use this button to enter CUSTOM, TEXT, PHOTO, CINEMA, GAME menus. (See p. 18) When adjusting your display settings, always press the AUTO button on the MONITOR SETUP OSD. (Only supported in Analog Mode) The best display mode E1942S : 1366 x 768 E2042S / E2042T : 1600 x 900 DVC8700 / E2242T / E2342T / E2442T : 1920 x 1080 You can choose the input signal. It is a mode that the screen is adjusted to the best for the text works. It is a mode that the screen is adjusted to the best to view pictures. It is a mode that the screen is adjusted to the best to view the videos. It is a mode that the screen is adjusted to the best to play a game. TROUBLESHOOTING 19 TROUBLESHOOTING Check the following before calling for service. No image appears Is the power cord of the display connected?Is the power indicator flickering? ENG ENGLISH y Check and see if the power cord is connected properly to the power outlet. y If the display is in power saving mode, try moving the mouse or pressing any key on the keyboard to bring up the screen. y This message appears when the signal from the PC (video card) is out of horizontal or vertical frequency range of the display. See the 'Specifications' section of this manual and configure your display again. y When the monitor is on "No-Signal" in 5 minutes, the monitor goes to DPM mode. Do you see an "OUT OF RANGE" message on the screen? Do you see a "NO SIGNAL" message on the screen? Do you see a "OSD LOCKED" message on the screen?Do you see "OSD LOCKED" when you push MENU button? y You can secure the current control settings, so that they cannot be inadvertently changed. You can unlock the OSD controls at any time by pushing the MENU button for several seconds: the message "OSD UNLOCKED" will appear. Display image is incorrect Display Position is incorrect. [. . . ] Or, you can also download the driver from our web site: http://www. lg. com. y Make sure to check if the video card supports Plug&Play function. SPECIFICATIONS 21 SPECIFICATIONS E1942S Display Screen Type Pixel Pitch Horizontal Frequency Vertical Frequency Input Form Signal Input Input Form Max Recommend DDC 2B(Analog) On Mode : 15 W(Typ. ) Sleep Mode 0. 3 W Off Mode 0. 3 W 19 V 1. 2 A 47. 0 cm (18. 5 inch) Flat Panel Active matrix-TFT LCDAntiGlare coating Visible diagonal size: 47. 0 cm 0. 3 mm x 0. 3 mm (Pixel Pitch) 30 kHz to 61 kHz (Automatic) 56Hz to 75Hz (D-SUB) Separate Sync. 15 pin D-SUB Connector RGB Analog (0. 7 Vp-p/ 75 ohm) D-SUB(Analog) : 1366 x 768 @ 60 Hz VESA 1366 x 768 @ 60 Hz ENG ENGLISH Sync Input Video Input Resolution Plug & Play Power Consumption Power Input AC-DC Adapter Type ADS-40SG-19-3 19025G, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPG-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPBR-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPI-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPCU-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type LCAP21, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-B, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE Dimensions (Width x Height x Depth) Weight Tilt Range Environmental conditions OUTPUT: 19 V With Stand Without Stand 2. 1 kg -5° to 20° 1. 3 A 44. 1 cm x 34. 9 cm x 16. 8 cm 44. 1 cm x 27. 5 cm x 5. 5 cm Operating Temperature 10°C to 35 °C Operating Humidity 10 % to 80 % Storage Temperature Storage Humidity -20°C to 60 °C 5 % to 90 % non-Condensing Stand Base Power cord Attached ( ), Detached (O) Wall-outlet type Product specifications shown above may be changed without prior notice due to upgrade of product functions. 22 SPECIFICATIONS SPECIFICATIONS E2042S Display Screen Type Pixel Pitch Horizontal Frequency Vertical Frequency Input Form Signal Input Input Form Max Recommend DDC 2B(Analog) On Mode : 20 W(Typ. ) Sleep Mode 0. 3 W Off Mode 0. 3 W 19 V 1. 2 A 50. 8 cm (20 inch) Flat Panel Active matrix-TFT LCDAntiGlare coating Visible diagonal size: 50. 8 cm 0. 276 mm x 0. 276 mm (Pixel Pitch) 30 kHz to 83 kHz (Automatic) 56Hz to 75Hz (D-SUB) Separate Sync. 15 pin D-SUB Connector RGB Analog (0. 7 Vp-p/ 75 ohm) D-SUB(Analog) : 1600 x 900 @ 60 Hz VESA 1600 x 900 @ 60 Hz ENGLISH ENG Sync Input Video Input Resolution Plug & Play Power Consumption Power Input AC-DC Adapter Type ADS-40SG-19-3 19025G, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPG-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPBR-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPI-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPCU-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type LCAP21, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-B, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE Dimensions (Width x Height x Depth) Weight Tilt Range Environmental conditions OUTPUT: 19 V With Stand Without Stand 2. 3 kg -5° to 20° 1. 3 A 47. 4 cm x 36. 6 cm x 16. 8 cm 47. 4 cm x 29. 2 cm x 5. 5 cm Operating Temperature 10°C to 35 °C Operating Humidity 10 % to 80 % Storage Temperature Storage Humidity -20°C to 60 °C 5 % to 90 % non-Condensing Stand Base Power cord Attached ( ), Detached (O) Wall-outlet type Product specifications shown above may be changed without prior notice due to upgrade of product functions. SPECIFICATIONS 23 SPECIFICATIONS E2042T Display Screen Type Pixel Pitch Horizontal Frequency Vertical Frequency Input Form Signal Input Input Form Max Recommend DDC 2B(Analog, Digital) On Mode : 20 W(Typ. ) Sleep Mode 0. 3 W Off Mode 0. 3 W 19 V 1. 2 A 50. 8 cm (20 inch) Flat Panel Active matrix-TFT LCDAntiGlare coating Visible diagonal size: 50. 8 cm 0. 276 mm x 0. 276 mm (Pixel Pitch) 30 kHz to 83 kHz (Automatic) 56Hz to 75Hz (D-SUB, DVI-D) Separate Sync. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE LG DVC8700




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual LG DVC8700 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.