User manual LG NB2540

[. . . ] ENGLISH DEUTSCH FRANÇAIS OWNER’S MANUAL 2. 1 Channel Powerful Bass Sound Bar Please read this manual carefully before operating your set and retain it for future reference. NB2540 (NB2540, S24A1-W) NB2540D (NB2540D, S24A1-W) ITALIANO SLOVENŠČINA NEDERLANDS www. lg. com NB2540-NB. ADEULLK_ENG. indd 1 2014-02-07 9:55:33 1 Getting Started 2 Getting Started WARNING: Do not install this equipment in a confined space such as a book case or similar unit. Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over heating. The openings shall be never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product shall not be placed in a builtin installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instruction has been adhered to. [. . . ] 4. Turn on the portable player or external device and start playing it. NB2540-NB. ADEULLK_ENG. indd 14 2014-02-07 9:55:38 Operating 15 Operations DRC (Dynamic Range Control) Make the sound clear when the volume is turned down (Dolby Digital only). This function turns on or off each time you press DRC ON/OFF AUTO POWER On/Off This function automatically turns on/off the unit when you turn on/off the TV or the external device (DVD Player, Blu-ray Disc Player, etc. ) connected to this unit. yy After the unit is turned on by AUTO POWER function, it will be automatically turned off if there is no signal for a certain period of time from the TV connected by LG Sound Sync (Optical/Wireless). yy After the unit is turned on by AUTO POWER function, it will be automatically turned off if there is no signal for a certain period of time from the external device connected by an optical cable. yy If you turned off the unit directly, it cannot be turned on automatically by AUTO POWER function. However the unit can be turned on by AUTO POWER function when optical signal comes in after 5 seconds of no signal. yy In Bluetooth mode, this unit may be turned on by AUTO POWER setting depending on the connected Bluetooth device and then LG TV function is selected. In this case the unit will be turned off automatically and when you restart the unit, it will be turned on by LG TV function. Turn off the sound temporarily Press i to mute your unit. To cancel it, press i again on the remote control or change the volume level. Note , , 3 Operating NB2540-NB. ADEULLK_ENG. indd 15 2014-02-07 9:55:38 16 Operating Auto power down This unit will power off itself to save electric consumption in the case main unit is not connected to external device and is not used for 20 minutes. So does this unit after six hours since Main unit has been connected to other device using analog input. With wired connection 1. Connect your LG TV to the unit by using an optical cable. LG Sound Sync Optical cable 3 Operating You can control some functions of this unit by your TV's remote control with LG Sound Sync. Controllable function by LG TV's remote control : Volume up/down, mute Refer to the TV's instruction manual for the details of LG Sound Sync. Make one of the following connections, depending on the capabilities of your equipment. yy You can also use the remote control of this unit while using LG Sound Sync. If you use TV's remote control again, the unit synchronizes with the TV. yy When the connection fails, make sure of the condition of the TV and power. yy Make sure of the condition of this unit and the connection in the cases below when using LG Sound Sync. -- Disconnecting the wireless connection caused by interference or a distance. yy The amount of time to turn off this unit is different depending on your TV when you set AUTO POWER function to ON. 2. Set up LG Sound Sync (Optical) on the TV. 4. Select OPTICAL IN function by using OPTICAL on the remote control or F on the unit until the function is selected. TV sound will be outputted from the soundbar if connecting normally between this unit and your TV. Note , , NB2540-NB. ADEULLK_ENG. indd 16 2014-02-07 9:55:38 Operating 17 With wireless connection 1. Turn on the unit by pressing 1 (Power) on the remote control. 2. Select LG TV function by using LG TV on the remote control or F on the unit until the function is selected. LG TV LED will be turned on for 3 seconds and turned off when unit is completely connected to TV. [. . . ] Scan up or down through memorized channels. MUSIC CINEMA OFF OFF STANDARD yy Depending on the TV being connected, you may not be able to control your TV using some of the buttons. yy The remote control of the unit performs basic operation of your TV. Please use the TV’s remote control to enjoy advanced operation of your TV. Note , , NB2540-NB. ADEULLK_ENG. indd 20 2014-02-07 9:55:38 Troubleshooting 21 Troubleshooting PROBLEM No Power CAUSE & CORRECTION yy The power cord is unpluged. (Refer to the page 13. ) yy The remote control is too far from the unit. [. . . ]