Detailed instructions for use are in the User's Guide.
[. . . ] ENGLISH DEUTSCH FRANÇAIS NEDERLANDS SLOVENSCINA ITALIANO
OWNER'S MANUAL
300W Sound Bar System
Please read this manual carefully before operating your set and retain it for future reference.
ESPAÑOL PORTUGUÊS
NB3520A (NB3520A, SHS36-D)
NB3520A-NB_DDEULLK_ENG_6185. indd 1
2012-01-17 6:48:55
2
Getting Started Most appliances recommend they be placed upon a dedicated circuit; That is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized service center. [. . . ] Function is retuned to previous one.
NB3520A-NB_DDEULLK_ENG_6185. indd 15
2012-01-17 6:49:00
16
Connecting
USB Playback
Insert USB memory device to the USB port on the right side of the unit.
Compatible USB Devices
y MP3 Player : Flash type MP3 player. y The USB function of this unit does not support some USB devices.
USB device requirement
2
Connecting Removing the USB Device from the unit. Remove the USB device from the unit.
NB3520A-NB_DDEULLK_ENG_6185. indd 16
y Devices which require additional program installation connected to a computer, are not supported. y For a large capacity USB, it may take longer than a few minutes to be searched. y If you use a USB extension cable or USB hub, the USB device is not recognized. y This unit is not supported when the total number of files is 1000 or more. y External HDD, Card readers, Locked devices, or hard type USB devices are not supported. The unit can not be used as a storage device.
2012-01-17 6:49:00
Operating
17
Basic Operations
USB Operation
1. During playback, press C or V to go to the next file or to return to the beginning of the current file. Press and hold C/V during playback and release it at the point you want to listen to. Press REPEAT on the remote control repeatedly, the display change in the following order, RPT 1 RPT D (DIRECTORY) RPT ALL RANDOM OFF. Press 0 to 9 numerical buttons on the remote control to go to the desired file directly. Do this
Other Operations
DOLBY DRC (Dynamic Range Control)
Make the sound clear when the volume is turned down (Dolby Digital only). Set to [DRC ON] by using DOLBY DRC.
AV Sync
When receiving audio signals from TV, sound and images may not be matched. Use C V to scroll up and down through the delay amount, which you can set at anything between 0 and 300m/sec.
3
Operating
Skipping to the next/ previous file
AUTO POWER On/Off
Before operating this function, make sure that you have selected OPTICAL IN and turn on the AUTO POWER. This function automatically turns on/off the unit when you turn on/off the external device (TV, DVD Player, Blu-ray Disc Player, etc. ) connected to this unit by the optical cable. Display AUTO POWER ON AUTO POWER OFF Operation AUTO POWER function is turned on. AUTO POWER function is turned off.
Searching for a section within a file
Playing repeatedly or randomly
Selecting files directly
y This function is intentionally designed to turn off the unit after 15 minutes of inactivity. If you did not connect external devices with optical cable or there is no digital audio signal going to the unit, the unit will turn off after 15 minutes of inactivity if AUTO POWER function is turned on. y Depending on the connected device by the optical cable, this function may not operate.
, Note
NB3520A-NB_DDEULLK_ENG_6185. indd 17
2012-01-17 6:49:00
18
Operating
Sleep Timer Setting
Press SLEEP one or more times to select delay time between 10 and 180 minutes, after the unit will turn off. To cancel the sleep function, press SLEEP repeatedly until "SLEEP 10" appears, and then press SLEEP once again while "SLEEP 10" is displayed. The remaining time appears in the display window.
Displaying file and input source
You can display various information on the USB and OPTICAL IN 1/ 2 mode by pressing INFO. [. . . ] y The device with Bluetooth wireless technology is disconnected, if you turn off the main unit or put the device away from the main unit more than 10m.
, Note
3
Operating
NB3520A-NB_DDEULLK_ENG_6185. indd 21
2012-01-17 6:49:01
22 Operating
Controlling a TV with the Supplied Remote Control
You can control your TV using the buttons below.
Setting up the remote to control your TV
You can operate your TV with the supplied remote control. If your TV is listed in the table below, set the appropriate manufacturer code. While holding down 1 (TV POWER) button, and press the manufacturer code for your TV with the numerical buttons (see the table below). Manufacturer LG Code Number 1(Default), 2 1, 3, 4 1, 2 6, 7 8, 9 4
VOL + AV/INPUT VOL -
PR/CH PR/CH
3
Button MUTE Operation Turn the TV's volume on or off Switch the TV's input source between the TV and other input sources. [. . . ]