User manual LG RC185

[. . . ] WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING: Do not install this equipment in a confined space such as a book case or similar unit. Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over heating. The openings shall be never be blocked by placing the product on a bed, sofa, rug or other similar surface. [. . . ] To exit SEARCH mode, press z(PLAY). Operating 39 Still Picture and Frame-by-Frame Playback 1. You can advance or back up the picture frameby frame by pressing a/d repeatedly during PAUSE mode. y The picture frame-by-frame in reverse is not available for Video CD. y You can advance the picture frameby-frame by pressing PAUSE/STEP (M) repeatedly on the remote control. 4. Playback starts from the selected time on the disc. Checking the Contents of DVD Video Discs: Menus DVDs may contain menus that allow you to access special features. Or, use the a/ d/s/w buttons to highlight your selection, then press ENTER (b). , Note Title Menu 1. If the current title has a menu, the menu will appear on the TV screen. The menu may contain camera angles, spoken language and subtitle options, and chapters for the title. Slow Motion 1. To exit Slow Motion mode, press z (PLAY). 4 Operating Disc Menu 1. To remove the disc menu, press MENU/LIST again. Time Search The Time Search function allows you to start playing at any chosen time on the disc. The Time Search box shows the elapsed playing time of the current disc. y During the high-speed picture search modes, a short time is needed to stabilize tape speed when re-entering the PLAY mode. Search This function lets you visually search forward and backward for a desired scene on your tape. y If the Recorder is left in the SEARCH mode for more than 3 minutes, the Recorder will automatically enter the PLAY mode, to protect the tape and video heads. To return to playback, press z(PLAY). , Note 42 Operating Still Picture and Frame-by-Frame Playback 1. y If a still picture vibrates vertically, stabilize it by using PR/TRK (s/w) on the remote control. y If the Recorder is left in the STILL mode for more than 5 minutes, the Recorder will automatically enter the STOP mode to protect the tape and video heads. Press M (PAUSE/STEP) repeatedly to advance the video picture one frame at a time while viewing a still picture. The tape will be played back at a speed 1/19 times slower than the normal speed. Playing a DivX Movie Disc Using this unit you can play DivX disc. Before playing DivX files, read "About DivX movie files" on right. If you are in a file list and want to return to the Folder list, use the s/w buttons on the remote to highlight g and press ENTER (b). 4 Operating y During slow playback, use PR/TRK (s/w) on the Remote Control to minimize noise bands. y If slow motion mode continues for more than 3 minutes, the Recorder will automatically change to normal play mode. [. . . ] When this choice is made, this unit will automatically convert any 96 kHz signals to 48 kHz so your system can decode them. y If your TV is not equipped with Dolby Digital and MPEG decoder, set the [Dolby Digital] and [MPEG] options to [PCM] on the setup menu. y If your TV is not equipped with DTS decoder, set the [DTS] options to [OFF] on the setup menu. To enjoy DTS multi channel surround, you must connect this unit to a DTS compatible receiver via one of this unit's digital audio outputs. Appendix Appendix 65 Controlling a TV with the Supplied Remote Control You can control your TV using the buttons below. Setting up the remote to control your TV You can operate your TV with the supplied remote control. [. . . ]