User manual LG RC278

[. . . ] For more detailed information about disposal of your old appliance, please contact your city office, waste disposal service or the shop where you purchased the product. CAUTION concerning the Power Cord Most appliances recommend they be placed upon a dedicated circuit; That is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. [. . . ] 2 You can advance or back up the picture frame-byframe by pressing b / B repeatedly during PAUSE mode. ote The picture frame-by-frame in reverse is not available for Video CD. ip You can advance the picture frame-by-frame by pressing PAUSE/STEP (X) repeatedly on the remote control. General Features ote Unless stated otherwise, all operations described use the remote control. Some features may also be available on the Setup menu. 31 HOOKUP When a disc has more than one title, you can move to another title as follows: Press DISPLAY twice then use v / V to select the title icon. Then, press the appropriate numbered button (0-9) or b / B to select a title number. Operation with DVD and Video CD (Continued) General Features (Continued) Slow Motion DVD Video VR +RW +R VCD RAM 1 Press PAUSE/STEP (X) during playback. 2 Press BACKWARD (m) or FORWARD(M) during PAUSE mode. The Recorder will enter SLOW mode. ote On a Video CD with PBC, you must set PBC to OFF in the Setup menu. The play mode may vary according to the recorded content. Time Search DVD Video VR +RW +R DivX RAM 3 Use the BACKWARD (m) or FORWARD(M) to select the required speed: t 1/16, t 1/8, t 1/4, or t 1/2 (backward), or T 1/16, T 1/8, T 1/4, or T 1/2 (forward). With a Video CD, the Slow speed changes: T 1/8, T 1/4 or T 1/2 (forward). ote Slow motion playback in reverse is not possible with Video CDs. The Time Search function allows you to start playing at any chosen time on the disc. The on-screen display appears on the TV screen. The Time Search box shows the elapsed playing time of the current disc. 2 Within 7 seconds, use v / V to select the Time Search icon in the on-screen display. The "-:--:--" appears in the Time Search box. 3 Within 7 seconds, use the number buttons to enter the required start time. Enter hours, minutes, and seconds from left to right in the box. You can not enter an invalid time. Before playing DivX files, read "About DivX movie files" on right. ote This recorder cannot play back the DivX file(s) in the USB Memory Stick. If you are in a file list and want to return to the Folder list, use the v / V buttons on the remote to highlight and press ENTER. Movie menu options 1. Press v / V to select a folder/file on the Movie menu then press ENTER. [Open] Opens the folder and a list of files in the folder appears About DivX movie files DivX disc compatibility with this recorder is limited as follows: Available resolution size of the DivX file is under 720x576 (W x H) pixel. The DivX subtitle file name has to be identified with the DivX file name to display by this unit. The total number of files and folders on the disc should be less than 1999. If the number of the screen frame is over 29. 97 frames per second, this unit may not operate normally. If the video and audio structure of recorded file is not interleaved, returns to the menu screen. If the file is recorded with GMC, the unit supports only 1-point of the record level. There are different levels of GMC encoding, usually called 1-point, 2-point, or 3-point GMC. [. . . ] Manufacturer LG / GoldStar Zenith Samsung Sony Hitachi Code Number 1 (Default), 2 1, 3, 4 6, 7 8, 9 4 By pressing POWER AV/INPUT You can Turn the TV on or off. Switch the TV's input source between the TV and other input sources. Adjust the volume of the TV. PR/CH +/­ VOL +/­ otes Depending on your TV, some or all buttons may not function on the TV, even after entering the correct manufacturer code. If you enter a new code number, the code number previously entered will be erased. [. . . ]