User manual LG W2243T

[. . . ] It can cause injury to human, problem to product and damage the display. To Prevent Fire or Hazards: Always turn the display OFF if you leave the room for more than a short period of time. Keep children from dropping or pushing objects into the display's cabinet openings. When the display is to be left unattended for an extended period of time, unplug it from the wall outlet. [. . . ] When monitor power is turned on, the 'Self Image Setting Function' is executed automatically. This function provides the user with optimal display settings. When the user connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals. When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted screen while using the device or after changing screen resolution, press the AUTO/SET function button to improve resolution. A7 Connecting the Display Using the cable holder (This feature is not available in all models. ) OPEN Cable holder 1 OPEN 2 4 3 E OP N A8 Control Panel Functions Front Panel Controls Control Button Function Use this button to enter 4:3 IN WIDE, PHOTO EFFECT items, for more information, refer to page A17. MENU Button Use this button to enter or exit from the On Screen Display. OSD LOCKED/UNLOCKED This function allows you to lock the current control settings, so that these settings are not inadvertently changed. To lock the OSD settings, press and hold the MENU button for several seconds. You can unlock the OSD settings at any time by pushing the MENU button for several seconds. The message "OSD UNLOCKED" appears. A9 Control Panel Functions Control Buttons Button ( ) Function Use these buttons to select or adjust functions in the On Screen Display. For more information, refer to page A18. Button (SOURCE) Use this button to make either D-Sub or DVI connector active. AUTO IMAGE ADJUSTMENT When adjusting your display settings, always press the AUTO/SET button prior to entering the On Screen Display(OSD). This will automatically adjust your display image to the ideal settings for the current screen resolution size (display mode). The best display mode is: W2043TE : 1600 x 900 W2243TE/W2343TE : 1920 x 1080 AUTO/SET Button Power Button Use this button to turn the display on or off. Power Indicator This Indicator lights up as red when the display is operating normally(On Mode). If the display is in Sleep Mode (Energy Saving), this indicator color changes to flicker. A10 On Screen Display (OSD) Control Adjustment Screen Adjustment Making adjustments to the image size, position and operating parameters of the display is quick and easy with the On Screen Display Control system. A short example is given below to familiarize you with the use of the controls. The following section is an outline of the available adjustments and selections you can make using the OSD. NOTE Allow the display to stabilize for at least 30 minutes before making image adjustments. To make adjustments in the On Screen Display, follow these steps: Press the MENU Button, then the main menu of the OSD appears. When the icon you want becomes highlighted, press the AUTO/SET Button. Push the MENU Button once to return to the main menu to select another function. If the output of the video card is different the required specifications, the color level may deteriorate due to video signal distortion. Using this function, the signal level is adjusted to fit into the standard output level of the video card in order to provide the optimal image. Activate this function when white and black colors are present in the screen. Use this function to set the power indicator on the front side of the monitor to ON or OFF. If you set ON at any time, the power indicator will automatically be turned on. Restore all factory default settings except "LANGUAGE. " Press the , buttons to reset immediately. MENU : Exit : Adjust : Adjust SET : Select another sub-menu POWER INDICATOR FACTORY RESET If this does not improve the screen image, restore the factory default settings. [. . . ] Or, you can also download the driver from our web site: http://www. lge. com. · Make sure to check if the video card supports Plug&Play function. A21 Specifications Display W2043TE 20. 0 inches (50. 8 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size: 50. 8 cm 0. 2766*0. 2766 mm pixel pitch Horizontal Freq. Input Form Analog : 30 - 83 kHz (Automatic) Digital : 30 - 83 kHz (Automatic) 56 - 75 Hz (Automatic) Separate TTL, Positive/Negative SOG (Sync On Green) Digital (HDCP) 15 pin D-Sub Connector DVI - D connector (Digital) RGB Analog (0. 7 Vp-p/ 75 ohm), Digital Analog : VESA 1600 x 900 @60 Hz Digital : VESA 1600 x 900 @60 Hz VESA 1600 x 900 @60 Hz : 25 W(Typ. ) 1W 1W Sync Input Video Input Signal Input Input Form Resolution Max Recommend Plug&Play Power Consumption Dimensions &Weight DDC 2B (Digital), DDC 2AB (Analog) On Mode Sleep Mode Off Mode Width Height Depth Net With Stand Without Stand 48. 36 cm / 19. 04 inches 48. 36 cm / 19. 04 inches 37. 68 cm / 14. 83 inches 31. 40 cm / 12. 36 inches 18. 30 cm / 7. 20 inches 6. 30 cm / 2. 48 inches 3. 4 kg (7. 56 lbs) Tilt Range Power Input Environmental Conditions Tilt -5°~15° AC 100-240V~ 50/60Hz 1. 0 A Operating Conditions Temperature 10°C to 35 °C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20°C to 60 °C Humidity 5 % to 90 % non-Condensing Attached( ), Detached ( O ) Wall-outlet type Stand Base Power cord NOTE Information in this document is subject to change without notice. A22 Specifications Display W2243TE 21. 5 inches (54. 6 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size: 54. 6 cm 0. 248*0. 248 mm pixel pitch Horizontal Freq. Input Form Analog : 30 - 83 kHz (Automatic) Digital : 30 - 83 kHz (Automatic) 56 - 75 Hz (Automatic) Separate TTL, Positive/Negative SOG (Sync On Green) Digital (HDCP) 15 pin D-Sub Connector DVI - D connector (Digital) RGB Analog (0. 7 Vp-p/ 75 ohm), Digital Analog : VESA 1920 x 1080 @60 Hz Digital : VESA 1920 x 1080 @60 Hz VESA 1920 x 1080 @60 Hz : 25 W(Typ. ) 1W 1W Sync Input Video Input Signal Input Input Form Resolution Max Recommend Plug&Play Power Consumption Dimensions &Weight DDC 2B (Digital), DDC 2AB (Analog) On Mode Sleep Mode Off Mode Width Height Depth Net With Stand Without Stand 51. 64 cm / 20. 33 inches 51. 64 cm / 20. 33 inches 39. 60 cm / 15. 59 inches 33. 27 cm / 13. 10 inches 19. 80 cm / 7. 80 inches 6. 20 cm / 2. 44 inches 3. 8 kg (8. 49 lbs) Tilt Range Power Input Environmental Conditions Tilt -5°~15° AC 100-240V~ 50/60Hz 1. 0A Operating Conditions Temperature 10°C to 35 °C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20°C to 60 °C Humidity 5 % to 90 % non-Condensing Attached( ), Detached ( O ) Wall-outlet type Stand Base Power cord NOTE Information in this document is subject to change without notice. A23 Specifications Display W2343TE 23 inches (58. 4 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size: 58. 4 cm 0. 265*0. 265 mm pixel pitch Horizontal Freq. [. . . ]