User manual LG WD-80264NP

[. . . ] If the appliance is installed on a carpeted floor ensure that the ventilation holes on the base of the appliance are not obstructed. N) If the appliance is not running properly or breaks down, switch it off, turn off the tap and do not tamper with the appliance. Consult only the Authorised Technical Support Service for possible repair and ask them to use original spare parts. Failure to comply with the above can compromise the safety of the appliance. [. . . ] It is possible to modify the spin speed without to pausing the machine. Note: The machine is fitted with a special electronic device, which prevents the spin cycle should the load be unbalanced. This reduces the noise and vibration in the machine and so prolongs the life of your machine. Spin speed indicator light When you set a program, the maximum possible spin speed will be automatically shown by the relevant indicator light. Choosing a smaller spin speed by the appropriate button, the relevant indicator light will go on. L Once a programme is selected the programme selector remains stationary on the selected programme till cycle ends. Switch off the washing machine by turning the selector to "OFF". TIME TO END indicator light M In order to manage your time better, this washing machine features an indicator light system that keeps you constantly informed on the remaining cycle time. Indicator light STOP: End of the programme. Note: The programme selector must be returned to the "OFF" position at the end of each cycle or when starting a subsequent wash cycle prior to the next programme being selected and started. Buttons indicator light O The indicator light around the option buttons will light when specific options are selected. If you select an option button that is not compatible with the programme required the button light will not illuminate. 10 11 TABLE OF PROGRAMMES PROGRAM FOR: PROGRAMME SELECTOR ON: WEIGHT MAX kg TEMP. °C CHARGE DETERGENT Resistant fabrics Cotton, linen Whites with prewash Fast coloureds Cotton, mixed Fast coloureds Non fast coloureds 6 90° 60° 40° 30° ** 6 6 6 Please read these notes When washing heavily soiled laundry it is recommended the load is reduced to 4 kg maximum. ** Programmes according to CENELEC EN 60456. Mixed fabrics and synthetics Mixed, resistant Fast coloureds with Prewash Fast coloureds Non fast coloureds 3 60° 50° 40° 40° Synthetics (nylon, perlon), mixed cotton ** 3 3 The spin speed may also be reduced, to match any guidelines suggested on the fabric label, or for very delicate fabrics cancel the spin completely this option is available with a spin speed button. Very delicate fabrics Delicates "MACHINE WASHABLE" woollens Hand wash ** 2 1 40° 1 - 30° - Rinse SpecialS Fast spin - - Drain only - - Mix & Wash system programme 6 40° Rapid 32 minute 2 50° 12 13 Programme selector For the various types of fabrics and various degrees of dirt the washing machine has different programme bands according to: wash cycle, temperature and length of cycle (see table of washing cycle programmes). RESISTANTS FABRICS The programmes have been designed for a maximum wash and the rinses, with spin intervals, ensure perfect rinsing. When selecting the "32 minute rapid" programme, please note that we recommend you use only 20% of the recommended quantities shown on the detergent pack. Automatic Variable Capacity The washing machine is fitted with an automatic reduction in consumption system (known as Automatic Variable Capacity). Dosage for powder detergent For normal and low concentration detergents: for normally soiled laundry choose a programme without prewash. Put 1/4 of the detergent in compartment "I", 3/4 in compartment "II" of the drawer. When using water softeners, first put in the detergent, then add the softener to compartment "II". For highly concentrated detergents not in single dose format, follow what is shown on pack exactly as regards type and amount of dosage. To avoid the difficulty of checking if the detergent has been taken up, use the dosage aids provided in the detergent packaging. Energy savings of 5 to 15% are made by not selecting the prewash option for normal soiled laundry. Which wash temperature should you choose? Using stain removers before machine washing reduces the need to wash at temperatures over 60°C. Energy savings of up to 50% can be made by using a 60°C wash temperature rather than 90°C Liquid detergent dosage Liquid detergents may be used in accordance with the instructions on the relevant packaging, for all programmes without prewash, by using the special container which is placed in the drum or, for those models that have it, in the special insert for liquid detergents. 18 19 Main wash Sorting the laundry It is recommended you wash only items which are machine washable with water and detergent and not dry-clean items. If you need to wash rugs, bedspreads or other heavy items, it is best not to spin them. Sort the laundry according to fabric type, degree of soiling and wash temperature: Always follow the wash care advice on the garment label for the most suitable care and treatment of the laundry Laundry for hot wash Coloured, easy-care materials Delicates and wool Wash by hand Items labelled with the following symbol are not suitable for machine washing: Dry clean For very delicate items, such as net curtains, underwear, tights etc. , you are advised to use a laundry net or wash bag. Woollen items must be labelled with the "Pure New Wool" symbol to be washed in the machine , and must also be labelled "non-matting" or "machine washable". We therefore recommend that coloured items should be washed for the first time separately. [. . . ] - Carrying out more rinse cycles does not serve any purpose in such cases. CUSTOMER SERVICE AND GUARANTEE Your new appliance is fully guaranteed by the manufacturer for 12 months against electrical/mechanical breakdown excluding: A. Any faults which occur due to bad installation or misuse of the machine. Any faults which occur due to repair of, or interference with, the machine by any person not authorised by the manufacturer to carry out service. Any faults which arise from parts fitted to the machine which are not the manufacturers original parts. [. . . ]