User manual LIFT-MASTER 02 515

[. . . ] EMERGENCY EGRESS DEVICE MODIFICATION FLUSH OR EXTENDED HANDLE APPLICATION REQUIREMENTS: This modification is available for models LGJ, MJ, J, DJ and MGJ standard door operator with 24V control circuits. FUNCTIONS: This modification provides a public means for manual operator of a storefront grille. PACKING LIST: PART NUMBER *02515 **02516 DESCRIPTION Panic Release Device with Flush Arm Panic Release Device with Extended Arm QUANTITY 1 1 *Shipped with emergency egress with flush handle **Shipped with emergency egress with extended handle WARNING INSTALLATION INSTRUCTIONS NOTE: Part of this installation will be easier if it is done before the operator is mounted. [. . . ] ALL installations and electrical connections MUST be made by a qualified individual. CAUTION 2. Slide the cable housing through the notch in the operator frame spacer. Leaving the top collar loose, pull the cable housing down until the operator release yolk makes contact with the release plate. Work the egress handle several times and adjust the collars if necessary. DO NOT OVERBEND the lever, the switch should just bottom out when the egress handle is up. Remove the sash chain (not necessary if the operator was set up for an emergency egress device). 01-11960C © 2005, The Chamberlain Group, Inc. [. . . ] All Rights Reserved Printed in Mexico Cable Housing Collars Release Lever Operator Release Yolk Release Plate Release Chain Release Handle in up position [. . . ]