User manual MATSONIC MS9147C VERSION 5.0A

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MATSONIC MS9147C. We hope that this MATSONIC MS9147C user guide will be useful to you.


MATSONIC MS9147C VERSION 5.0A: Download the complete user guide (371 Ko)

Manual abstract: user guide MATSONIC MS9147CVERSION 5.0A

Detailed instructions for use are in the User's Guide.

[. . . ] Mainboard User's Manual This publication, photographs, illustrations and software are under the protection of international copyright laws and all rights reserved. It does not allow any reproduction of this manual, content and any materials contained herein without the written consent of the authentic manufacturer. The manufacturer does neither represent nor warrant the contents hereof; and specifically disclaims any implied warranties of merchantability or fitness for any particular purpose. Furthermore, the manufacturer reserves the right to revise and change this publication from time to time, without the obligation of notifying any person of such revision or changes. Trademarks IBM, VGA, and PS/2 are registered trademarks of International Business Machines. [. . . ] There are two kinds of connector because different brands of CDROM drive have different kinds of audio cable connectors. CD1 Pin 1 2 3 4 Signal CD IN L GND GND CD IN R CD2 Pin 1 2 3 4 Signal GND CD IN R GND CD IN L 21 Mainboard User's Manual SIR1: Serial infrared port The mainboard supports a Serial Infrared (SIR1) data port. Infrared ports allow the wireless exchange of information between your computer and similarly equipped devices such as printers, laptops, Personal Digital Assistants (PDAs), and other computers. Pin 1 3 5 Signal NC +5V IRTX Pin 2 4 6 Signal KEY GND IRRX 22 3: BIOS Setup Utility Chapter 3 BIOS Setup Utility Introduction The BIOS Setup Utility records settings and information of your computer, such as date and time, the type of hardware installed, and various configuration settings. Your computer applies those information to initialize all the components when booting up and basic functions of coordination between system components. If the Setup Utility configuration is incorrect, it may cause the system to malfunction. If it happens, you can use the clear CMOS jumper to clear the CMOS memory which has stored the configuration information; or you can hold down the Page Up key while rebooting your computer. You might need to do this to configure some hardware installed in or connected to the mainboard, such as the CPU, system memory, disk drives, etc. 23 Mainboard User's Manual Running the Setup Utility Every time you start your computer, a message appears on the screen before the operating system loading that prompts you to "Hit <DEL>if you want to run SETUP". Whenever you see this message, press the Delete key, and the Main menu page of the Setup Utility appears on your monitor. AMIBIOS SIMPLE SETUP UTILITY ­ VERSION 1. 21. 12 (C) 2000 American Megatrends, Inc. All Rights Reserved Standard CMOS Setup Advanced Setup Power Management Setup PCI / Plug and Play Setup Load Optimal Settings Load Best Performance Settings Esc : Quit : Select Item (Shift)F2 : Change Color F5 : Old Values F6 : Optimal values F7 : Best performance values F10 : Save&Exit Standards COMOS setup for changing time, date, hard disk type, etc. Features Setup CPU PnP Setup Hardware Monitor Change Password Exit You can use cursor arrow keys to highlight anyone of options on the main menu page. Hold down the Shift key and press F2 to cycle through the Setup Utility's optional color schemes. Some options on the main menu page lead to tables of items with installed values that you can use cursor arrow keys to highlight one item, and press PgUp and PgDn keys to cycle through alternative values of that item. The other options on the main menu page lead to dialog boxes that require your answer Yes or No by hitting the Y or N keys. If you have already changed the setup utility, press F10 to save those changes and exit the utility. Press F7 to install the setup utility with a set of high-performance values. 24 3: BIOS Setup Utility Standard CMOS Setup Page This page displays a table of items defining basic information about your system. AMIBIOS SETUP ­ STANDARD CMOS SETUP (C) 2000 American Megatrends, Inc. All Rights Reserved Date (mm/dd/yy) : Mon Sept 05, 2002 Time (hh/mm/ss) : 17:08:22 Type Pri Master : Auto Pri Slave : Auto Sec Master : Auto Sec Slave : Auto LBA Blk PIO 32Bit Size Cyln Head WPcom Sec Mode Mode Mode Mode On On On On Floppy Drive A : 1. 44 MB 3 1/2 Floppy Drive B : Not Installed Month : Jan ­ Dec Day : 01 ­ 31 Year : 1901 ­ 2099 ESC : Exit : Select Item PU/PD/+/- : Modify (Shift)F2 : Color F3 : Detect All HDD Date & Time IDE Pri Master Pri Slave Sec Master Sec Slave Floppy Drive A Floppy Drive B Use these items to set up system date and time Use these items to configure devices connected to the Primary and Secondary IDE channels. If the Auto setting fails to find a hard disk drive, set it to User, and then fill in the hard disk characteristics (Size, Cyls, etc. ) manually. Use these items to set up size and capacity of the floppy diskette drive(s) installed in the system. 25 Mainboard User's Manual Advanced Setup Page This page sets up more advanced information about your system. Any changes can affect the operation of your computer. AMIBIOS SETUP ­ ADVANCED SETUP (C) 2000 American Megatrends, Inc. All Rights Reserved Quick Boot 1st Boot Device 2nd Boot Device 3rd Boot Device Try Other Boot Devices S. M. A. R. T. for Hard Disks BootUp Num-Lock Floppy Drive Swap Floppy Drive Seek Password Check Boot To OS/2 L2 Cache System BIOS Cacheable SDRAM Timing by SPD SDRAM Frequency SDRAM CAS# Latency SDRAM Bank Interleave AGP Mode AGP Comp. Driving Enabled IDE-0 Floppy CDROM Yes Disabled On Disabled Disabled Setup No Enabled Enabled Disables 100MHz 2. 5 Disabled 4X Auto CB AGP Aperture Size Auto detect DIMM/PCI Clk CLK Gen Spread Spectrum 64MB Disabled Disabled ESC : Quit F1 F5 F6 F7 : Help : Select Item PU/PD/+/- : Modify : Old Values (Shift)F2 : Color : Load BIOS Defaults : Load Setup Defaults Quick Boot 1st Boot Device 2nd Boot Device 3rd Boot Device Try Other Boot Device If you enable this item, the system starts up more quickly be elimination some of the power on test routines. [. . . ] All Rights Reserved *** System Hardware *** Vcore Vcc 2. 5V Vcc 3. 3V Vcc 5V +12V -12V SB5V VBAT SYSTEM Fan Speed CPU Fan Speed Power Temperature SYSTEM Temperature CPU Temperature 1. 632V 2. 496V 3. 392V 4. 972V 11. 968V -0. 907V 5. 053V 3. 488V 0 RPM 1350 RPM 32°C/89°F 39°C/102°F 55°C/131°F ESC : Quit F1 F5 F6 F7 : Help : Select Item PU/PD/+/- : Modify : Old Values (Shift)F2 : Color : Load BIOS Defaults : Load Setup Defaults CPU / System Temperature FANs & Voltage Measurements These items display CPU and system temperature measurement. These items indicate cooling fan speeds in RPM and the various system voltage measurements. 36 3: BIOS Setup Utility Change Password If you highlight this item and press Enter, a dialog box appears that you can enter a Supervisor password. There will be the second dialog box asking you to retype the password for confirmation. Then, the password is required for the access to the Setup Utility or for it at start-up, depending on the setting of the Password Check item in Advanced Setup. Exit Highlight this item and press Enter to save the changes that you have made in the Setup Utility configuration and exit the program. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE MATSONIC MS9147C




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MATSONIC MS9147C will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.