User manual METABO SBE900

[. . . ] Contact with or inhalation of the dust may cause allergic reactions and/or respiratory diseases to the operator or bystanders. Certain kinds of dust are classified as carcinogenic such as oak and beech dust especially in conjunction with additives for wood conditioning (chromate, wood preservative). - Where the use of a dust extraction device is possible it shall be used. Specified Use The machine is suitable for drilling, without impact, in metal, wood, plastic and similar materials and for impact drilling in concrete, stone and similar materials. [. . . ] Torque, for drilling) = impulse function switched on constantly (to facilitate tightening and releasing of screws that are tight even when the screw heads are damaged. To enable clean drilling without centre punching in tiles, aluminium or other materials). A: With the trigger Continuous operation (13) pressed, push in the locking button (12) and release the trigger. In continuous operation, the machine continues running if it is forced out of your hands. Therefore, always hold the machine with both hands using the handles provided, stand in a safe position and concentrate. J The ratchet sound which can possibly be heard after opening the drill chuck is functional and is switched off by a reverse rotation of the sleeve. If the chuck is very tightly closed: Firmly grip the chuck with an open-end spanner at the chuck head and firmly turn the sleeve in the direction of the arrow -1. Keep turning the sleeve (it must "click" when turning) until it cannot be turned any further - only now is the tool safely clamped. With a soft tool shank, retightening may be required after a short period of operation. Initial Operation Before plugging in the device, check to see that the rated mains voltage and mains frequency, as specified on the rating label, match your power supply. To guarantee secure purchase of the chuck: After initial drilling (clockwise), use a screwdriver to firmly tighten the safety screw inside the drill chuck (if available/depending on the model). D Do not activate the rotation selector switch (11) unless the motor has completely stopped. F Change thumbwheel (1) only when the machine is in the process of running down (briefly switch it on and off). 11 Unscrew the chuck (when driving screws without the chuck or for use with attachments) Fig. 31281) is attached, the screwdriver bit inserted in the hexagon socket of the spindle is held in place. Environmental Protection Observe national regulations on environmentally compatible disposal and on the recycling of disused machines, packaging and accessories. Only for EU countries: Never dispose of power tools in your household waste!In accordance with European Guideline 2002/ 96/EC on used electronic and electric equipment and its implementation in national legal systems, used power tools must be collected separately and handed in for environmentally compatible recycling. Cleaning, Maintenance Keyless chuck cleaning: After prolonged use hold the chuck vertically, with the opening facing down, and fully open and close it several times. The application of cleaning spray to the jaws and jaw openings at regular intervals is recommended. [. . . ] Slow flashing - carbon brushes worn (SBE 1100 Plus) The carbon brushes are almost completely worn. If the brushes are completely worn, the machine switches off automatically. Permanently lit - overload (SBE 1100 Plus) If the machine is subject to long periods of continuous overloading, the power input of the machine is limited. Use only accessories which fulfil the requirements and specifications listed in these operating instructions. [. . . ]