User manual MICROMEGA FM-10

[. . . ] Should you have any doubt about its condition, please do not hesitate to contact your dealer. POWER UP You may now turn on FM-10 by switching the ON/OFF switch located at the back of the unit. The central LED lights up indicating that the unit is in Standby mode. The display indicates: UNPACKING • Very carefully remove the unit from the box, taking care to preserve all the packing material. [. . . ] The display indicates : • FM-10 is factory preset with RDS function activated. Two seconds after locking on the selected station, the display will indicate the name of the station according to the RDS standard : FM-10 is set for the best reception with a cable antenna. If you are using an individual antenna it is recommended that you increase the input sensitivity of FM-10. During the 2 seconds while the display indicates : • Press once on STANDBY. The display indicates then: AUTOMATIC SEARCH ( SCANNING ) Automatic search (scanning) allows you to scan the frequency band upwards ( short press ) or downwards ( long press ). • Press on the SCANNING key ( short or long press depending upon the desired scanning direction ). FM-10 will start to scan until it finds the next station of sufficient strength, whereupon the lock indicator will light. During search the display indicates: This indication stays visible for 2 seconds while you can access the LEVEL indicator to find the best position for your antenna. • During the period when ANTENNA is displayed, press once on STANDBY. The display indicates then: If this is not a desired station, please repeat the operation. . Move the antenna until you obtain the strongest possible signal. We recommend that you use a strong station for this purpose (ex BBC ). The display indicates : PRESET STATIONS Through the pre-set mode you can store and access up to 50 stations. To store a station • Locate the station that you wish to store either by manual or scanning mode. : P05) or P- - should the memory be empty. This indication stays visible for 2 seconds while you can press on STANDBY to de-activate this function. The dislay indicates then for 2 seconds : • Select the desired pre-set number (from 01 to 50) with the central rotary control. Note : Any station that you store to an existing pre-set will automatically overwrite the previous stored station. [. . . ] 4. 2 kg WARRANTY This warranty will start from the date of purchase of the Micromega product. Statutory warranty regulations apply in the country where the Micromega product was purchased. In case of complaints please contact the dealer who supplied your Micromega product. [. . . ]