User manual MICROMEGA MYZIC

[. . . ] TECHNICAL CHARACTERISTICS Audio Characteristics Bandwidth (± 0, 5 dB) Signal to noise ratio A weighted (20Hz – 20kHz) THD (32 Ω – 20 mW - 20 Hz – 20 kHz) Gain Headphone impedance 10 Hz – 100 kHz > 115 dB < 0, 005% 12 dB ≥16 Ω C7 85 – 265 Vac 47 – 63 Hz < 200 mW 140 x 150 x 35 206 x 201 x 67 300 g 400 g !!! [. . . ] Should you have any doubt about its condition, please do not hesitate to contact your dealer. Opening the box, you should find: • One C7 AC Mains cord matching your area. Mains voltage MyZIC is equipped with an internal universal power supply allowing you to use MyZIC with voltage and frequency in the range of 85-265 Vac / 50-60 Hz. Connections and Power up Except for the mains cord, MyZIC is not supplied with any interconnect cables. To get the best out of your unit, we recommend that you use good quality cables. Following the diagram on the next page, connect your source to MyZIC appropriate input. Eventually connect the stereo analog output of MyZIC to a line input of your amplifier. Plug the AC line cord to the mains input of MyZIC and then connect the other end to your wall mains inlet. As soon as MyZIC is connected to the mains, the led located under the MyZIC logo will light up in red indicating that the unit is in Standby mode. [. . . ] The unit is then respectful of the most stringent ECO regulations. Notice 140x140 UK. indd 4-6 12/12/12 10:50 [. . . ]