User manual MINOURA SS-700

[. . . ] SS-700 Bicycle Maintenance & Display Stand ­ instructions manual Spinning-Stand Important Notes · Only for normal 2-wheel bicycle with 125 - 140mm rear hub. [. . . ] Be careful not to pinch your finger when opening and closing the legs. Frame LeftSide Coupling QuickHub ClampLever Leg HowToInstallYourBikeonSS-700 1 2 3 4 At first, replace your rear wheel quick release skewer to the supplied one. A) Pull up the Quick Hub Clamp Lever to retract the Right Side Coupling. B) Insert the left side (quick lever side) skewer into the Left Side Coupling first. The quick lever shaft must be inserted into the cutout on the coupling (see Fig. While keeping this position, slowly come down the bike to align the right side acorn nut to the Right Side Coupling. C) Turntoadjustposition Pulluplever (Fig. B) LoosenLockRing (Fig. A) Pushdownlever (Fig. C) 5 6 TightenLockRing (Fig. D) Push down the Quick Hub Clamp Lever to hold the rear wheel. C) If you start feeling resistance when the lever comes at 4 o'clock position, it's correct. If clamping the hub is too tight or too loose due to wrong position of the Left Side Coupling, pull up the lever to release the bike, adjust the Left Side Coupling position, and try clamping the hub again. [. . . ] Too loose setting may cause the bike to come out of the trainer during use. ! [. . . ]