User manual MITSUBISHI ECLIPSE

[. . . ] Whilst every effort has been made to ensure the accuracy of the instructions contained in this guide, Mitsubishi Electric reserves the right to make improvements and changes to the product described in this guide and/or to the guide itself, without prior notice. RaymanBowling and RaymanGarden are published by Ludigames. Rayman logo and character is a trademark of Ubi Soft Entertainment. This guide describes the basic operations of the Trium dual band GSM/GPRS telephone Eclipse. © Mitsubishi Electric Telecom Europe, 2002 First Steps with your English The phone at a glance LED Indicates a call or battery charge Antenna Side shuttle key Alert tones Backlight Earpiece Infrared module Colour graphic display Displays telephone numbers, menus, messages, etc. Cursor key Navigates around the memories and menus Send your own Vcard Voice memo Menu Phonebook Left softkey (programmable) Call/SEND key Dials displayed number or name and answers calls. Voice Recognition (long press) Right softkey (programmable) Alphanumeric keys Enter text and telephone numbers On/Off, END key Hold down to turn on or off the phone. [. . . ] · If the callers number is available but does not match one stored in your phonebook it will appear in the display. If it does match a stored number then the associated name will appear instead. · If the caller has withheld their number Withheld number will be displayed during call presentation; then Call 1 will be displayed during connection. · will appear if the call has been received on your line 2 number. The caller's number, if available will be stored in the received calls log. Time & Date setting Two clocks are managed by the phone: · The Origin clock: corresponding to the time and date used for all processing in the phone. · A Secondary clock: indicates the time of another part of the world. Three settings are managed for each clock: · The time difference with GMT. · The daylight saving rule: two values are available, Winter time and Summer time (+1hr). To set the time and/or date of the Origin clock: 1 2 3 18 Press . Select World clock and press Options Select Edit Origin. . 4 5 6 7 1 2 3 4 1 2 3 Select City, enter the name of your town and press OK to validate. Select World Clock, enter the time zone (GMT) and press OK to validate. Select Daylight saving rule, select Winter time or Summer time (+1 hr) and press Select to validate. Select Date & time, enter the date in the format shown and press OK to validate. Select Office Tools. To set the secondary time, Select World clock and press Options Select Edit Secondary. The secondary clock becomes the Origin/mobile clock and the Origin clock becomes the secondary one. Press Exit or to return to the standby display. 4 Unanswered call, voice mail, new SMS message, Inbox and Push indicators · If some received calls remain unanswered, will be displayed. Press Read to view the callers' numbers if available and the date and time the call was received. · When you receive notification that a voice message has been deposited in your voice mail box an alert tone will sound and will appear in the display. Press Call or Read to view the message or press and hold to speed - dial your voice mail message centre. 4 If more than one indicator is shown, pressing "Read" will display a menu allowing you to choose between different items. · When a new SMS message is received, an alert tone will sound and will be displayed. If is flashing you will have to delete at least one old received message to be able to receive new ones. 19 Basic operations · When data (vCards or vCalendar) are received from the IrDA port, will be displayed. [. . . ] Select Gateway settings, and edit an IP address (mandatory) for the WAPTM gateway then press OK to validate. 6 Select Activate security (Never, Automatic or Always requested for secure transactions such as mobile banking), then press Select to validate. 7 Select a Normal port corresponding to the connection or Secure port for a secure connection, then press OK to validate. 8 Select Send Characteristics to send or not the UA profile, to the remote server and press Select to validate. [. . . ]