Detailed instructions for use are in the User's Guide.
[. . . ] DIGITAL COLOR PRINTER
MODEL
CP30DW
OPERATION MANUAL
THIS OPERATION MANUAL IS IMPORTANT TO YOU. PLEASE READ IT BEFORE USING YOUR DIGITAL COLOR PRINTER.
This digital color printer complies with the requirements of the EC Directive 89/336/EEC, 73/23/EEC, 93/42/EEC and 93/68/EEC. The electro-magnetic susceptibility has been chosen at a level that gains proper operation in residential areas, on business and light industrial premises and on small-scale enterprises, inside as well as outside of the buildings. All places of operation are characterised by their connection to the public low voltage power supply system.
WARNING:
In the USA or Canada, use the AC power cord according to the recommendation as below, in order to comply with UL60601-1 and CAN/CSA C22. 2 No. [. . . ] If liquid is spilled into or seeps into the unit, unplug the Power Cord immediately and seek service as soon as possible to avoid additional or possible damage due to corrosion. "In the interest of safety, avoid handling of liquids near the unit. "
DO NOT REMOVE THE CABINET. THERE ARE NO USER SERVICEABLE PARTS INSIDE AND YOU WILL EXPOSE YOURSELF TO HAZARDOUS VOLTAGES AND/ OR YOU MAY CAUSE DAMAGE TO THE UNIT.
Touching internal parts is dangerous, and may cause a malfunction. Disconnect the power cord before opening the cover to clear a paper jam, etc.
DO NOT USE THIS UNIT WHEN DROPPED OR DAMAGED THE CABINET
Using a unit dropped or damaged its cabinet may cause fire or electric hazard.
2
UNPLUG THE POWER CORD DURING A LONG ABSENCE OR DURING AN ELECTRICAL STORM
Turn off the Main Power switch and unplug the power cord during a long absence or during an electrical storm.
PRECAUTIONS
WHEN TRANSPORTING THE UNIT
When transporting the unit, remove the ribbon cartridge and paper. Make sure to unplug the power cord and other cables.
BE CAREFUL AROUND PAPER CASSETTE LOADING SLOT, RIBBON CARTRIDGE LOADING SLOT AND PRINT OUTLET
Do not insert your fingers or any object into the paper cassette loading slot, ribbon cartridge loading slot and print outlet during printing. It can cause injury, damage on the parts, and malfunction caused by static electricity.
FEATURES
DO NOT PLUG OR UNPLUG POWER CORD BY WET HAND
CONNECTIONS PREPARATION
It may cause shock hazard.
DO NOT TOUCH THE THERMAL HEAD AND METAL PARTS
It becomes hot during printing and may remain hot for a time, causing injury. Oils, salts and moisture from your hands will contaminate the head and may spoil the prints.
CONNECTING CABLES
Use the power cord supplied with the printer.
INSTALLATION LOCATIONS
MAINTAIN GOOD VENTILATION
Ventilation slots and holes are provided on the rear, sides and bottom of this unit. Place the unit on a hard and level surface and keep a space between the unit and the walls to ensure proper ventilation. When installing the unit in a system rack, leave space between the unit and the back of the rack.
TROUBLESHOOTING
SUITABLE LOCATIONS
Avoid installing the printer in unstable locations with high vibration or in hot-springs areas where hydrogen sulfide and acidic ions are likely to be generated.
AVOID PLACES WITH HIGH HUMIDITY AND DUST
Do not place the unit in locations with high humidity and dust, as this can cause extensive damage. Avoid places where unit is likely to be exposed to oily fumes and vapors.
OTHERS
AVOID PLACES LIKELY TO BE EXTREMELY HOT
Places exposed to direct sunlight, or near heating appliances can attain extremely high temperatures which may deform the cabinet, or cause other damage.
PLACE THE UNIT ON A HORIZONTAL SURFACE
The operation of the unit is likely to be affected if it is tilted, inclined or in unstable places.
3
SAFETY PRECAUTIONS
PROTECT AGAINST DEW FORMATION
When the unit is moved from a cold area into a warm area, moisture can condense inside the unit and prevent operation. Replace the wet print paper and ribbon cartridge with new ones.
OPERATING AMBIENT TEMPERATURE RANGE
The operating temperature range is 41°F - 104°F (5°C to 40°C) and humidity of 30 - 80% RH. When using the unit in a system rack, make sure that the temperature inside the rack does not exceed this range.
FOR LONG OPERATING LIFE
UNSUITABLE MATERIALS FOR THE PRINTER
Paint coat flaking and plastic deformation are likely to occur if the unit is wiped with chemical dusters, benzene, thinner or any other solvent, if rubber or PVC items are left in contact with the unit for a extended period, or if the unit is sprayed with insecticide.
CARE OF THE CABINET
Unplug and clean with a soft cloth slightly moistened with a mild soap and water solution. Never use petroleum based solutions or abrasive cleaners.
HEAD ABRASION
The thermal print head, like a video head, wears out. When it is worn, it becomes hard to print out fine details of the picture. If it occurs, consult your dealer about having the head replaced.
CONNECTING DEVICES
Read thoroughly the Safety Notices, Cautions and Operating Precautions of the instruction booklets for the other devices connected with the unit.
CAUTION ON RELOCATING
When transporting the unit, make sure it is not likely to be subjected to impacts. Before moving the unit, make sure to disconnect the power cord from the power outlet, and the cables from the connected devices.
SAFETY TECHNICAL CHECKS
Periods: According to the recommendations of the manufacturer of medical device. Scope: a) Visual inspection Housing, leads, controls, displays, labels/ markings, accessories, operation manual. b) Functionality test Testing of functions (according to operation manual) as well as compatibility and usability of device and accessories. c) Electrical test Testing of electrical safety of the system according to EN60601-1. High humidity or dust Avoid locations with high humidity and dust in order to avoid malfunction. Heat Direct sunlight, heaters or other heat sources may deform the housing and subsequently cause malfunctioning.
4
TECHNICAL DESCRIPTION
The supplier will make available on request such circuit diagrams, component part lists, descriptions, calibration instructions or other information which will assist the User's appropriately qualified technical personnel to repair those parts of the EQUIPMENT which are classified by the manufacturer as repairable. The use of ACCESSORY equipment not complying with the equivalent safety requirements of this equipment may lead to a reduced level of safety of the resulting system. [. . . ] · Refer to "OVERCOMING PAPER JAMS" .
CONNECTIONS PREPARATION TROUBLESHOOTING OTHERS
Blinking 18
Blinking The access cover opens during printing. · Turn off the power, close the access cover and then turn on the power again. Other defects (mechanical error, system error) · Turn off the power and contact your dealer. 8
Blinking
Blinking
-
17
TROUBLESHOOTING
OVERCOMING PAPER JAMS
1 Check the error display on the status indicator.
When is displayed, go to step 2.
DATA RIBBON PAPER ALARM
2
Eject the ribbon cartridge by pressing the RIBBON EJECT button.
When the ribbon cartridge can not be ejected by pressing the RIBBON EJECT button, turn off the power and turn it on again. [. . . ]