User manual MITSUBISHI XD50U
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MITSUBISHI XD50U. We hope that this MITSUBISHI XD50U user guide will be useful to you.
You may also download the following manuals related to this product:
MITSUBISHI XD50U PRODUKTINFORMATION (100 ko)
MITSUBISHI XD50U BROCHURES (559 ko)
MITSUBISHI XD50U Product Brochure (559 ko)
MITSUBISHI XD50U PRODUCT INFORMATION (99 ko)
Manual abstract: user guide MITSUBISHI XD50U
Detailed instructions for use are in the User's Guide.
[. . . ] DATA PROJECTOR
MODEL
XD50U
User Manual
IMPORTANT
* DLPTM (Digital Light Processing) and DMD (Digital Micromirror Device) are registered trademarks of Texas Instruments Incorporated (U. S. A. ). * DMD is an ultra-precise part developed by Texas Instruments (U. S. A. ) which takes the place of liquid crystal (in the projector). * VGA and XGA are trademarks or registered trademarks of International Business Machines Corporation (U. S. A. ). * S-VGA is a registered trademark of Video Electronics Standards Association. [. . . ] Adjustment Bar
Sub menu
Item Name
Settings Contents
E-34
Menu Operation Method
Performing Menu Operations
· When a signal is not being input, only [Setup] and [Info. ] can be selected. · The menu display will close if, after pressing a button, the next button operation is not made within 30 seconds. · The adjustment and the setting values are stored even when the power is switched off or the plug is disconnected from the power outlet. (Note that some items are not stored. ) Preparation Switch on the power of the connected equipment, start the play operation or another operation, and input the signal to the projector. The menu display of the description diagram depicts an example in which the "Keystone" item name is selected.
Menu Display
1
Press the MENU button to display the menu
MEN
U
CAN
CEL
ENTER
TIME
R
KSTN
The menu name that existed when the menu was closed previously will be displayed.
Selection of the Menu Name
2
Press the SELECT
button to select the menu name
MEN
U
CAN
CEL
ENTER
TIME
R
KSTN
Each press of the SELECT button advances the selection one step in the sequence of "Color" "View" "Setup" "Info. " "Image". The selected menu name will appear in red.
Note Please check that the cursor of the item name has disappeared at the time of menu name selection. Press the CANCEL button to make the cursor disappear.
E-35
Menu Operation Method
Displaying the Cursor
3
Press the SELECT
MEN U CAN
button to display the cursor
CEL
ENTER
TIME
R
KSTN
This condition allows selection of the item name.
Selection of the Item Name
4
Press the SELECT
MEN U CAN CEL
button to align the cursor with the item name
ENTER
TIME
R
KSTN
Items for which the Icon Is Displayed A press of the ENTER button displays the sub menu and the cursor moves to the sub menu. Press the SELECT button and align the cursor with the desired item name. There are also some items for which the setting display or the verification display will appear. Sub menu
MEN U CAN CEL
ENTER
TIME
R
KSTN
Making Adjustments/Settings
5
Press the SELECT
button and make the adjustment (or setting) while viewing the image
When a button is pressed, the image will also change.
MEN
U
CAN
CEL
ENTER
TIME
R
KSTN
Adjustment display: Each press of the button results in a change of 1 point and continued presses cause changes to proceed in order. Setting display: The setting contents display changes with each press of the button.
E-36
Menu Operation Method
Closing the Menu
6
Press the MENU button and close the menu display
MEN
U
CAN
CEL
ENTER
TIME
R
KSTN
Selecting Another Menu Name with Remote Control Operation
When a sub menu is displayed, press the CANCEL button and close the sub menu. Press the CANCEL button again and cancel the cursor display.
MEN U CAN CEL
ENTER
TIME
R
KSTN
Press the SELECT button and select the menu name. (Selection of the menu name is not possible while the cursor is displayed. )
MEN
U
CAN
CEL
ENTER
TIME
R
KSTN
Note A press of the QUICK button while the menu is displayed will close the menu and display the quick menu. A press of the MENU button while the quick menu is displayed will close the quick menu and display the menu.
E-37
Menu Operation Method
List of Item Names Offering Input Selection and Adjustments/Settings
The item names that can be adjusted/set will differ depending on the input signal.
[Example of Menu Display Items at the Time of Input Signal Analog RGB Selection]
Imput Terminal
p YP ut S bP ign al YC r bC Ar
PC
R G lR B D EO GB ita ig
Image
D
VI
S-
Menu name
Item Name
Brightness Contrast Picture Adj. Fine Picture H Position V Position Color Tint Sharpness Reset
Sub Menu Item Name
g
lo
na
In
VI
D
Reperence Page
Color
Gamma Color Temp. White Color Space White Balance
View
Aspect Filter Vertical Flip Horizontal Flip Keystone Keystone Save
"Tint" can be adjusted only at the time of NTSC composite/S signal input.
E-38
EO
E-40 E-40 E-40 E-41 E-41 E-41 E-40 E-40 E-40 E-41 E-42 E-42 E-42 E-43 E-43 E-44 E-44 E-45 E-45 E-45 E-45
Menu Operation Method
Imput Terminal
p YP ut S bP ign al YC r bC r A
PC
lo g R ita GB VI l R D EO GB ig D
Setup
S-
Menu name
Item Name
Auto Source Auto Power Off Memu Position Lamp Mode Input Format
Sub Menu Item Name
na
In
VI
D
Reperence Page
PC Video SVideo
Presentation Timer Logo Capture Logo Background Logo Scaling Logo Position Caputure Mode Invalidata Logo Start Logo Caputure Preview PC Card Viewer Initial Setting Play Mode Interval Repeat Progress Bar Option Language On Screen Background Startup Screen
Info.
Status Factory Default Lamp Timer Reset Resolution Frequency Lamp Timer
E-39
EO
E-46 E-46 E-46 E-47 E-47 E-47 E-47 E-48 E-48 E-48 E-49 E-49 E-49 E-50 E-50 E-51 E-51 E-52 E-52 E-52 E-53 E-53 E-53 E-54 E-55 E-55 E-55 E-56 E-56 E-56
Picture
· Perform this operation while projecting the picture for which the adjustment/setting will be made. See "Menu Operation Method" on Page E-33 for information about performing menu operations. See "List of Item Names Offering Input Selection and Adjustments/Settings" on Page E-38.
Brightness / Contrast / Color / Tint / Sharpness
Picture qualities such as brightness and contrast will change depending on the whether the room is bright or dark. Select the desired item name and then adjust with the SELECT Item Name Brightness Contrast Color Tint Sharpness SELECT Button buttons.
Darker Less contrast Less dense color More red Softer image
SELECT Button Brighter More contrast Denser color More green Sharper image
Note: * The adjustment values of the adjustable items are stored according to input source. * "Tint" can be adjusted only at the time of NTSC composite/S signal input.
Picture Adj. / Fine Picture / H Position / V Position
Usually, automatic adjustment is performed at the time of signal selection, but when automatic adjustment is not effective, these adjustments can be performed.
Note When the image extends beyond the boundaries of the screen or is smaller than the screen, check that the "View" "Aspect" setting is set to "Auto". (Picture Adjustment)
Adjust this when bright and dark vertical bands appear on the screen. [. . . ] Please be sure to contact your dealer.
E-69
Replacing the Lamp Cartridge
· The lamp that is used as a light source in the projector has a limited service life. The rated service life of the lamp is about 1500 hours (when used in normal mode only). This could be shortened depending on conditions of use and other factors. Note that lamp life will be extended when the projector is often used in Low mode. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE MITSUBISHI XD50U
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MITSUBISHI XD50U will begin.