User manual MORLEY PEDALS VOLUMES

[. . . ] Please take a few minutes to familiarize yourself with the features of your new pedal. [. . . ] BATTERY (ALL PEDALS) All Morley pedals are designed to use one 9V battery when not using an adapter. To prolong battery life, unplug your cord completely from the input jack when not using the pedal. When the pedal is not used for extended periods, remove the battery from the pedal or replace it every six months to prevent leakage problems. BATTERY REPLACEMENT (ALL PEDALS) When battery becomes weak, the effect will become weak and signal may become slightly distorted. Remove the battery door located on the bottom of the pedal (a short cord is attached to the door to help prevent loss). Once the door is off, the old battery can be removed and a new battery plugged in. Make sure the polarity (+/-) is correct before inserting the new battery. When you replace the battery door, you will notice it fits tight against the battery. [. . . ] The PVO is designed for use in front input of amp only. · Power On/Off Indicator: LED located above the Minimum Volume knob serves as power on/off indicator. · See above PLA instructions above for setting Minimum Volume. PVO SPECIFICATIONS POWER: 9V Battery or Morley 9VDC 300 mA regulated adapter (center pin is negative) CURRENT DRAW: 2. 5 mA @ 9 VDC CONTROLS: Minimum Volume TAPER: Audio WEIGHT: 3. 3 lb. / 1. 51 kg INDICATOR: Power LED on [. . . ]