User manual MR COFFEE 12-CUP COFFEEMAKERS

[. . . ] You will find exciting and entertaining tips and ideas, including great recipes!To reduce the risk of fire, electric shock and/or injury to persons, basic safety precautions should always be followed when using electrical appliances, including the following: 1. To protect against electric shock, do not immerse the power cord, power plug or coffeemaker in water or in any other liquid. Close adult supervision is necessary when this appliance is used by or near children. [. . . ] Insert the new disk into the frame and twist the cover back into place. (Figure 3) NOTE: If using paper filters, it is important that the sides of the filter fit flush against the side of the filter basket. If filter collapse occurs, dampen the filter before placing in the filter basket and adding ground coffee and water. Add the desired amount of coffee and gently shake to level the coffee. COFFEE® water filter in the basket, making sure that the side marked "this side up" faces you and that the water filter is level. Be sure the filter basket is properly centered and all the way down in the filter basket. Fill the decanter with cold, fresh water to the desired capacity (1 cup equals 5 ounces). For easy and accurate filling, the water markings on the glass decanter and on the dual water windows show the amount of water needed to make the corresponding desired number of cups. Do not fill past the "MAX line" or water will flow out of the overfill hole in the back of the water reservoir. The amount of coffee brewed will always be slightly less than the amount of water poured in the water reservoir. NOTE: Make sure the decanter is fully placed on the warming plate or the water and the grounds will overflow from the filter basket. You must first set the time when you would like the coffeemaker to begin brewing your coffee as described in "Setting the Clock and the Delay Brew Timer" section. To activate DELAY BREW and program your coffeemaker to brew coffee at a later time, press the Delay Brew button. The coffeemaker is now set to automatically brew coffee at the pre-set later time. At the pre-set time the green indicator light will turn on and the DELAY light will turn off, indicating the brewing has started. The coffeemaker warming plate will keep your coffee hot for 2 hours and then will automatically turn off. Thermal units will shut off immediatly after the brewing cycle is complete. As a safety feature, your coffeemaker will NOT start again automatically the next day. If you want your coffee to brew at the same time the following day, simply add a new filter, coffee and water and set DELAY BREW, by repeating Steps 2 and 3 above. To reduce the risk of damaging the decanter and/or the risk of personal injury, do not add cold water to the decanter if the decanter is already hot. And with the decanter and the filter basket securely in place, turn the coffeemaker on. for Programmable models: Press the ON Button to begin the brewing cycle. [. . . ] Or Canada, please call us at the following toll-free telephone numbers to find the location of the nearest authorized service center: U. 1-800-MR COFFEE (1-800-672-6333) Canada 1-800-667-8623 You may also visit our website at www. To assist us in serving you, please have the coffeemaker model number and date of purchase available when you call. In all your communications, please include your complete name, address and telephone number and a description of the problem. [. . . ]