User manual NEC LT10
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual NEC LT10. We hope that this NEC LT10 user guide will be useful to you.
Manual abstract: user guide NEC LT10
Detailed instructions for use are in the User's Guide.
[. . . ] Portable Projector LT10 Users Manual
FCC Notice
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Trademarks
Trademarks are the rights of their respective owners.
Table of Contents
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Important Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The OSM menu will close and the
projector will automatically save the new settings.
Main Menu
Sub Menu
Setting
$
User Controls
Computer / Video Mode
-nglish
Language
Language
You can display the multilingual OSM menu . or
%
-nglish
User Controls
Computer / Video Mode
All Images
Brightness
Adjusting the brightness of the image. to lighten the image.
Contrast
The contrast controls the degree of difference between the lightest and darkest parts of the picture. Adjusting the contrast changes the amount of black and white in the image. to increase the contrast.
White Peaking
White peaking can be incrementally adjusted between 0 and 10. Setting 0 will maximize color reproduction quality.
Color Temperature
Adjust the color temperature. At higher temperature, the screen looks colder; at lower temperature, the screen looks warmer.
Keystone
Adjusts image distortion caused by tilting projection (±16 degrees).
Zoom
Press the Press the to reduce the size of an image. to magnify an image on the projection screen.
&
User Controls
Computer / Video Mode
-nglish
All Images
Aspect Ratio
Selects the desired aspect ratio.
Reset This Menu
Choose "Yes" to return the display parameters on this menu to their factory default settings.
'
-nglish
User Controls
Computer Mode
Computer Image
Auto Adjust
The projector automatically adjusts clock, phase, horizontal and vertical. With most signal sources, Auto Adjust provides the best results.
Clock
"Clock"changes the display data frequency to match the frequency of your computer's graphic card. If you experience a vertical flickering bar, use this function to make an adjustment.
Phase
"Phase" synchronizes the signal timing of the display with the graphic card. If you experience an unstable or flickering image, use this function to correct it.
Horizontal
Press the Press the to move the image left. to move the image up.
Vertical
Press the Press the
Reset This Menu
Choose "Yes" to return the display parameters on this menu to their factory default settings.
User Controls
Video Mode
-nglish
Video Image
Color
Adjusts a video image from black and white to fully saturated color. to increase the amount of color in the image.
Sharpness
Adjusts the sharpness of the image. to increase the sharpness.
Hue
Adjusts the color balance of red and green. to increase the amount of red in the image.
Reset This Menu
Choose "Yes" to return the display parameters on this menu to their factory default settings.
-nglish
User Controls
Computer / Video Mode
Setup
Menu Location
Choose the Menu location on the display screen.
Orientation
Front-Desktop The factory default setting. Rear-Desktop When you select this function, the projector reverses the image so you can project behind a translucent screen. Front-Ceiling When you select this function, the projector turns the image upside down for ceiling-mounted projection. Rear-Ceiling When you select this function, the projector reverses and turns the image upside down at same time. You can project from behind a translucent screen with ceiling mounted projection.
Lamp Hour Meter
Displays the lamp's elapsed operating time (in hours).
Clear Lamp Hours Meter
Turns the lamp hour counter to 0 hours.
Reset This Menu
Choose "Yes" to return the display parameters on this menu to their factory default settings.
User Controls
Computer / Video Mode
-nglish
Setup
Factory Default
Choose "Yes" to return the display parameters (except for Lamp Hours) on all menus to their factory default settings.
!
-nglish
User Controls
Computer Mode
PIP
Picture-In-Picture
PIP
Choose "On" to turn the PIP screen on.
PIP Location
Choose the PIP screen position on the display screen.
PIP Switch Source
Choose the input source of the projector on the PIP screen.
The OSM does not include a PIP menu under Video mode.
Reset This Menu
Choose "Yes" to return the display parameters on this menu to their factory default settings.
"
Appendices
Troubleshooting
If you experience trouble with the projector, refer to the following information. If the problem persists, please contact your local reseller or service center.
Problem: No image appears on screen.
Ensure all the cables and power connections are correctly and securely connected as described in the "Installation" section. Make sure you have removed the lens cap and the projector is switched on.
-nglish
Problem: Partial, scrolling or incorrectly displayed image.
Press the "Auto Adjust" function in the "Computer Image" menu of the OSM. If you use a PC: If the resolution of your computer is higher than 1024 x 768. [. . . ] Regards.
Application Sheet for TravelCare Service Program
Country, product purchased : User's Company Name : User's Company Address : Phone No. , Fax No. : Local Contact office : Local Contact office Address : Phone No. , Fax No. on cabinet : Problem of units per User : Required Service : Requested period of Loan unit : Payment method : In Case of Credit Card : Card No. w/Valid Date : (1) Credit Card (2) Travelers Cheque (3) Cash (1) Repair and Return (2) Loan unit
A-3
Condition of your TravelCare Service Program
Enduser is requested to understand following conditions of TravelCare Service Program and complete the necessary information on the application sheet. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE NEC LT10
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual NEC LT10 will begin.