User manual NIKON AF-S VR II 70-200MM F/2.8G ED

[. . . ] € When the lens will not be used for an extended period of time, attach both front and rear lens caps and store the lens away from direct sunlight. Failure to do so could result in a fire, as the lens may focus sunlight onto a flammable object. 20) @ Mounting index 15 Jp En De Fr Es Se Ru Nl It Ck Ch Kr Thank you for purchasing the AF-S NIKKOR 70-200mm f/2. Before using this lens, please read these instructions and refer to your camera's User's Manual. [. . . ] To limit the range of autofocus This function is only available with autofocus. ) away, set the focusing limit switch to ∞–5m to reduce focusing time. Vibration reduction mode Basic concept of vibration reduction High Number of vibrations Camera shake Strong camera shake when taking pictures from a moving vehicle Panning shots Low Weak Strength of vibrations Strong Set the vibration reduction mode switch to NORMAL. 18 When taking pictures When taking panning shots When taking pictures from a moving vehicle Set the vibration reduction mode switch to either NORMAL or ACTIVE. Jp En De Fr Es Se Ru Nl It Ck Ch Kr Setting the vibration reduction ON/OFF switch ON: Vibration is reduced while the shutter-release button is pressed halfway and also at the instant the shutter is released. Because vibration is reduced in the viewfinder, auto/manual focusing and exact framing of the subject are easier. Setting the vibration reduction mode switch First, set the vibration reduction ON/OFF switch ON, then select the following mode: NORMAL: The vibration reduction mechanism primarily reduces camera shake, making smooth panning shots possible. ACTIVE: The vibration reduction mechanism reduces more noticeable camera shake, such as that which occurs when taking pictures from a moving vehicle. In this mode, the lens does not automatically distinguish panning from camera shake. Notes on using vibration reduction • After pressing the shutter-release button halfway, wait until the image in the viewfinder stabilizes before pressing the shutter-release button the rest of the way down. € Due to the characteristics of the vibration reduction mechanism, the image in the viewfinder may be blurred after the shutter is released. € When taking panning shots, be sure to set the vibration reduction mode switch to NORMAL. If the camera is panned in a wide arc, compensation for camera shake in the panning direction is not performed. For example, when panning the camera in a horizontal direction, vertical camera shake is reduced. This stabilizes the image whilst allowing the desired panning effect to be realized. € Do not turn the camera off or remove the lens from the camera while vibration reduction is operating. Failure to observe this note could result in the lens sounding and feeling as if an internal component is loose or broken when it is shaken. € With cameras featuring a built-in flash, vibration reduction does not function while the built-in flash is charging. € With autofocus cameras featuring an AF-ON button, vibration reduction does not function when the AF-ON button is pressed. 19 Jp En De Fr Es Se Ru Nl It Ck Ch Kr • When the camera is mounted on a tripod, set the vibration reduction ON/OFF switch to OFF. However, it is recommended that the switch be set to ON when using the camera on an unsecured tripod head or with monopod. Focusing, zooming, and depth of field Before focusing, rotate the zoom ring to adjust the focal length until the desired composition is framed. [. . . ] C Tryck in avtryckaren halvvägs eller tryck på AF-ON- knappen en gång till om du vill avbryta den manuella fokuseringen och gå tillbaka till autofokus. VARNING Se till att dra åt låsskruven till stativkragen ordentligt om du använder stativ, annars kan objektivet falla av stativet och orsaka kroppsskada. Fästa stativet Sätt in monteringsfoten till stativringen i stativkragen (1), dra åt låsskruven till stativkragen ordentligt (2). Håll ner låsspaken till stativringen (2) och skjut samtidigt monteringsfoten till stativringen (3). [. . . ]